Denon AVR-4308 Owner's Manual

Also see for AVR-3808: Owner's manual Control protocol Owner's manual Service manual Service manual

Contents

7GUI Menu Map Playback Information TroubleshootingENGLISHDigitalSelect digital input connector to assign to this source.[Input source][Selectable items]z: When a DENON DVD player and the DENON LINK have beenconnected, be sure to make a setting to “DENON LINK”.NOTE• This cannot be set for input sources for which “iPod dock” isassigned.• When an input source to which “DENON LINK” has been assignedis selected in the MAIN ZONE, the PCM signal and network audiosignal (Internet radio, music server or USB) input from the digitalinput connector cannot be output to the analog REC OUT connectoror multi-zone.Inputsource CD DVD HDP TV/CBL SAT VCR DVR V.AUXDefaultsettingCoaxial3Coaxial1 None Coaxial2Optical1Optical3Optical2Optical4Coaxial1 ~ 3 Optical1 ~ 4DENON LINK z NoneCD DVD HDP TV/CBL SATVCR DVR V.AUX• With HDMI, the video and audio signals are transferred simultaneously.To play the video signal assigned at “HDMI” combined with theaudio signal assigned at “Digital”, select “Digital” at GUI menu“Source Select” – “Input Mode”.• When the AVR-4308 / AVR-3808 and monitor are connected with anHDMI cable, if the monitor is not compatible with HDMI audio signalplayback, only the video signals are output to the monitor.• The audio signals input from the analog, digital and EXT. IN connectorsare not output to the monitor.NOTEWhen “HDMI Control” (vpage 5) is set to “ON”, HDMI cannot beassigned to “TV/CBL”.When “HDMI Control” is set to “ON”, the digital input connectorassigned to ”TV/CBL” changes to “Optical3”.SetupParameterAudioAdjust various audio parameters.F Menu tree FParameterAudioa Surround Parameterss Audyssey Settingsa Surround ParametersAdjust surround sound parameters.The adjustable parameters differ for the different surroundmodes.NON MTRX MTRX ON PLIIx CINEMA z1 PLIIx MUSIC z2ES MTRX z3 ES DSCRT z4 DSCRT ON OFFz1: This can be selected when “Surround Back” is set to “2spkrs”at the GUI menu “Manual Setup” – “Speaker Setup” – “SpeakerConfi guration” setting.z2: This can be selected when “Surround Back” is set to “2spkrs”or “1spkr” at the GUI menu “Manual Setup” – “Speaker Setup”–“Speaker Confi guration” setting.z3: This can be selected when playing DTS sources.z4: This can be selected when playing DTS sources including adiscrete 6.1-channel signal identifi cation signal.SB CH Out (for Multi-channel sources)Select playback mode for surround back channels.[Selectable items]When using the surround back speaker, you can change the “SBCH Out” setting by pressing STANDARD.s Audyssey SettingsSelect Room EQ, Dynamic EQ and Dynamic Volume.Room EQ[Selectable items]Audyssey : Optimize frequency response of all speakers.Audyssey Byp. L/R : Optimize frequency response of speakersexcept front L and R speakers.Audyssey Flat : Optimize frequency response of all speakersto fl at response.Manual : Apply frequency response set with “ManualEQ”.OFF : Turn equalizer off.Operating from the main unit or main remotecontrol unitPress ROOM EQ.Audyssey Audyssey Byp. L/RAudyssey FlatManualOFF• When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” isselected, “ ” lights.• After running Auto Setup, if the Speaker Confi guration, Distance,Channel Level, and Crossover Frequency have changed withoutincreasing the number of speakers measured, only “ ”lights.• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can beselected after the auto setup procedure has been performed.• After performing “Auto Setup”, the “Room EQ” setting automaticallybecomes “Audyssey”.• If the settings of speakers for which “None” has been determinedat “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”and “Audyssey Flat” cannot be selected. Either perform Auto Setupagain, or return to the setting after running Auto Setup with “AutoSetup” – “Parameter Check” – “Restore”.• When using headphones or EXT. IN mode, “Room EQ” cannotused.