Denon AVR-4311CI Owner's Manual

Also see for AirPlay AVR-4311CI: Addiction of new function Adición de una función nueva Brochure & specs Addendum sheet Owner's manual

Contents

Denon AVR-4311CI Owner's Manual Manual pdf 118 page image

115Basic versionSimple version InformationAdvanced versionOperating the sub remote controlunit• The sub remote control unit is equipped with frequently usedbuttons, so it can be used for simple remote control unit operations.• The sub remote control unit can also be used for multi-zone, so youcan use it to control this unit from other rooms.• The operations listed below can be performed with the sub remotecontrol unit.• Switching the input source• Adjusting the volume• SIRIUS, HD Radio and iPod operations• NET/USB direct play• Menu operations• Zone power on/off• It is not possible to operate devices other than the amplifier.NOTEThis unit cannot be used in the ZONE4 mode.DIRECT PLAY button• Playback is possible in the mode selected at menu “Direct Play”.FAVORITESPlayback starts from the first track registered in the favorites.ALL MUSICPlayback starts from the first track registered in the “Music” folder.• When USB is pressed, playback starts from the first track on theUSB memory device.NOTEWhen the media server is stopped or restarted, it may no longer bepossible to play tracks stored in the favorites.Setting the display time length of theremote control unit displayUse the following procedure to set the length of time for which todisplay data such as zone and mode on the display panel of the remotecontrol unit.1 Press and hold POWER ON andZONE/DEVICE ON for at least 3seconds.“SETUP” flashes twice on the remotecontrol unit.2 Use ui to display “LCD” onthe remote control unit and pressENTER.3 Use ui to set the display timelength and press ENTER.“SET” flashes four times on the remotecontrol unit and the normal operationmode is restored.Remote control unit display Display time05SEC 5 sec10SEC 10 sec15SEC 15 sec30SEC 30 secThe backlight of the remote control unit lights for 10 sec.Operating the main remote control unitRestoring all settings of the remote controlunit to defaultUse the following procedure to restore all default settings of theremote control unit at the time of purchase.1 Press and hold POWER ON andZONE/DEVICE ON for at least 3seconds.“SETUP” flashes twice on the remotecontrol unit.2 Use ui to display “RESET” onthe remote control unit and pressENTER.3 Use ui to display “ALL” onthe remote control unit and pressENTER.4 Use ui to display “YES” onthe remote control unit and pressENTER.“RESET” flashes four times on theremote control unit and the normaloperation mode is restored.