Denon AVR-4311CI Owner's Manual

Also see for AirPlay AVR-4311CI: Addiction of new function Adición de una función nueva Brochure & specs Addendum sheet Owner's manual

Contents

Denon AVR-4311CI Owner's Manual Manual pdf 69 page image

66Convenient functionsSleep timer functionThe power automatically goes into standby once the set time haselapsed.This is convenient for playing sources while going to sleep.Press SLEEP and display the time youwant to set.The indicator on the display lights.• The time switches as shown below eachtime SLEEP is pressed.OFF 10 min 20 30 40 506080 7090100110120To confirm the countdown time before putting theunit to sleepPress SLEEP.“Sleep : zmin” appears on the display.z Countdown timeTo cancel the sleep timerPress SLEEP to set “OFF”.The indicator on the display turns off.• The sleep timer setting is canceled if this unit’s power is set tostandby.• The sleep timer function can be set separately for the different zones(vpage 74 “Sleep timer function”).Adjusting the volume of the speakersYou can adjust the channel level either according to the playbacksources or to suit your taste, as described below.n Adjusting the volume of the different speakers1 Press ZONE SELECT to switch thezone mode to M (MAIN ZONE).The M indicator lights.2 Press AMP to set the remotecontrol unit to AMP-operationmode.3 Press CH LEVEL.CHANNEL LEVELFront LFront R-8.0dB-12.0dBSubwoofer1Subwoofer2Subwoofer0.0dB0.0dBON4 Use ui to select the speaker.The speaker that can be set switches each time one of thebuttons is pressed.5 Use o p to adjust the volume.• You can directly turn “OFF” the subwoofer outputs during2-channel playback in DIRECT or STEREO mode.Select “Subwoofer” and use o p to select “ON” or “OFF”.CHANNEL LEVELFront LFront R-8.0dB-12.0dBSubwoofer OFFWhen a headphone jack is inserted, the headphone channel level canbe adjusted.n Adjusting the volume of groups of speakers(Fader function)This function lets you adjust (fade) the sound all at once from thefront (front speaker / front height speaker / front wide speaker /center speaker) or rear (surround speaker / surround back speaker).1 Press ZONE SELECT to switch the zone mode to M(MAIN ZONE).The M indicator lights.2 Press AMP to set the remotecontrol unit to AMP-operationmode.3 Press CH LEVEL.4 Press i to select “Fader”, thenselect the item to be adjustingusing o p.CHANNEL LEVELFront LFront R-8.0dB-12.0dBFader Front RearFront Height LFront Height R0.0dB0.0dBFront Wide LFront Wide R-12.0dB-10.0dB0.0dB0.0dBSubwoofer2Surround LCenterSubwoofer10.0dB-12.0dBSurround R -10.0dB5 Use o p to adjust the volume of the speakers.(o : front, p: rear)• The fader function does not affect the subwoofer.• The fader can be adjusted until the volume of the speaker is adjustedto the lowest value of –12 dB.