47*%&0065"6%*0 7*%&0$0.10/&/57*%&0: 1# 1 37*%&0065065"6%*03-065 065)%.*065$0"9*"-RLRLTV/CABLE TunerConnect the cables to be used.TV tuner• When using a optical cable for the digital audio connection, make the settings at “System Setup” – “InputSetup” – “Digital In Assign” (vpage 22).• AVR-488’s S-Video connectors (input and output) and video connectors (input and output) haveindependent circuit structures, so that video signals input from the S-Video connectors are only outputfrom the S-Video connector outputs and video signals input from the pin connectors are only output fromthe pin connector outputs.• The signals input to the component (color difference) video connectors are not output from the VIDEOoutput connector (yellow) or the S-Video output connector.Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnectcorrectly.Connecting the Recording ComponentsVideo Cassette RecorderConnect the cables to be used.47*%&00653- 3-065065*/"6%*07*%&0*/"6%*07*%&0*/RLRLRLRLVideo cassette recorder• When recording via the AVR-488, the playback device’s cable must be of the same type as the cable usedto connect the AVR-488’s VCR OUT connector.Example: TV IN → S-Video cable : VCR OUT → S-Video cableTV IN → Video cable : VCR OUT → Video cable• AVR-488’s S-Video connectors (input and output) and video connectors (input and output) haveindependent circuit structures, so that video signals input from the S-Video connectors are only outputfrom the S-Video connector outputs and video signals input from the pin connectors are only output fromthe pin connector outputs.• The signals input to the component (color difference) video connectors are not output from the VIDEOoutput connector (yellow) or the S-Video output connector.orConnectionsGetting Started Setup Playback Remote Control Information TroubleshootingENGLISH