9OUTOUTOUTPREOUTPHONOFRONTCENTEREFECTSURROUNDSIGNALGND CDDVDVDPTV/DBSV.AUXVCR-1VCR-2MD/TAPE-1TAPE-2MONITORSOURCEMULTIOUT-1MONITOROUT-2DVDVDPTV/DBSV.AUXVCR-1VCR-2VCR-1VCR-2VCR-1VCR-2MD/TAPE-1TAPE-26CH EXT. INFRSWSRERFLCSLEL8CH EXT. IN AUDIO VIDEO S-VIDEOSUBWOOFERR LR LR LININLOOPANT.AMFMCOAX.75ANTENNA TERMINALSNote to CATV system installer:This reminder is provided to call the CATV system installer’sattention to Article 820-40 of the NEC which providesguidelines for proper grounding and, in particular, specifiesthat the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entry aspractical.Notes:• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnectthe AM loop antenna.• Make sure AM loop antenna lead terminals do not touchmetal parts of the panel.Connecting the antenna terminalsDIRECTION OFBROADCASTINGSTATIONFM ANTENNAFEEDERCABLE75 Ω/ohmsCOAXIALCABLEFM INDOORANTENNA(An Accessory)AM LOOPANTENNA(An Accessory)AM OUTDOORANTENNAConnection of AM antennas1. Loosen by turningcounterclockwise. 2. Insert the cord. 3. Tighten by turningclockwise.142 314mm9mm14mm19mm5mm5mm5C-2V3C-2V5C-2V300 Ω/ohms300 Ω/ohmsTERMINALSFM ANTENNAADAPTER(An Accessory)AM loop antenna assemblyRemove the vinyl tieand take out theconnection line.Connect to the AMantenna terminals.Bend in the reversedirection.MountInstallation holeMount on wall, etc.a. With the antennaon top any stablesurface.b. With the antennaattached to a wall.75 Ω/ohms COAXIAL CABLEGROUNDOpen the coverANTENNA ADAPTERREMOVECLAMP75 Ω/ohms COAXIAL CABLECLAMPCLAMPSHUTSHUTPULLPULL• An F-type FM antenna cable plug can be connected directly.• If the FM antenna cable’s plug is not of the F-type, connect using theincluded antenna adapter.F-type converter plug (attached)• When using the FM antennaattach to this apparatusCLAMP