Denon AVR-786 Operating Instructions Manual

Also see for AVR-786: Service manual Brochure & specs Operating instructions

ENGLISHENGLISH16Connecting Other Sources Connecting Other SourcesFor instructions on operations using the MULTI ZONE functions ( page 35, 36).Connecting the MULTI ZONE terminals• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 out (variablelevel) terminals can be used to play a different program source in ZONE2 the same time (page 35).• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wiredand connected between the MAIN ZONE and ZONE2, the remote-controllable devices in theMAIN ZONE can be controlled from ZONE2 using the remote control unit.ZONE2 out connectionsPower amplifier(ZONE2)RLIN(Variable)RLRLANOTE:• For instructions on installation and operation of separately sold devices, refer to the devices’operating instructions.++OUTPUTINPUTAUX OUTRC-616 INFRAREDRETRANSMITTERRC-617 INFRARED SENSORExtension terminals for future use.• When the power amplifier is assigned to the ZONE2 output channel at “Power Amp Assign.” inthe “System Setup” menu, the surround back speaker terminals can be used as the ZONE2speaker out terminals ( page 35).• The connections diagram below is an example for when the surround back speaker is assignedto the ZONE2 stereo 2 channel.In this case, surround back speaker out can not be used for MAIN ZONE.ZONE2 speaker out connections> << >> << >> <> < > <> < > <IN(L) (R)(L) (R)(L) (R)(L) (R)Connection terminalfor subwoofer withbuilt-in amplifier(subwoofer), etc.Surround speakersystemsSubwooferFront speakersystems (B)Front speakersystems (A)CenterspeakerZONE2 speakersystemsNOTE:• The settings must bechanged to use thisspeaker for ZONE2( page 43).