Denon AVR-786 Operating Instructions Manual

Also see for AVR-786: Service manual Brochure & specs Operating instructions

36ENGLISHENGLISHAdvanced Operation Advanced OperationRemote control unit operations duringmulti-source playback (selecting the source)1 Set the MODE 1 switch to the “AUDIO”.2 Set the MODE 2 switch to the “ZONE2”.3 Press the ZONE2 ON button.To cancel the ZONE2 mode:Press the ZONE2 OFF button.4 Press the FUNCTION button.The ZONE2 source switches directly.5 The output level of the ZONE2 SPEAKER OUTterminals can be controlled pressing theVOLUME button on the remote control unit.Default setting (ZONE2 VOLUME LEVEL):– – – dB (MINIMUM)6 When the ZONE2 SOURCE function is set toTUNER, the preset channel can be selectedusing the CHANNEL button on the remotecontrol unit.This is only possible when the main unit in the ZONE2 mode( page 43).Outputting a program source to amplifier,etc., in a different room (ZONE2 mode)1 Press the ZONE2/REC SELECT button to displaythe “ZONE2 SOURCE” on the display.The display switches as follows each time the button ispressed.2 Turn the FUNCTION knob to select the sourceyou want to output appears on the display.3 Start playing the source to be output.For operating instructions, refer to the manuals of therespective components.To cancel, turn the FUNCTION knob and select “SOURCE”.RECZONE24 Press the ZONE2 button. Lights• The signals of the source selected in the ZONE2 mode are alsooutput from the VCR and CDR/TAPE recording output terminals.• Digital signals are not output to the ZONE2 output terminals.ZONE2FUNCTION ZONE2/REC SELECTMODE 2MODE 1ZONE2 ONZONE2 OFFFUNCTIONVOLUMECHANNEL