Denon AVR-789 Owner's Manual

Also see for AVR-789: Owner's manual Product Compatibility Chart Service manual Service manual Comparison chart

Denon AVR-789 Owner's Manual Manual pdf 34 page image

Specifications[Selectable items]Last : Use the memorized setting from the last session.– – – : Always use the muting on condition when poweris turned on.[Variable range]–70dB ~ +18dB : Set the volume level when the power is turned onin units of 1 dB.[Selectable items]Full : The sound is cut off entirely.–40dB : The sound is attenuated by 40 dB.–20dB : The sound is attenuated by 20 dB.f Power On LevelDefine the volume setting that is active when the power is turnedon.g Mute LevelSet the amount of attenuation when muting is on.For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 18).F Menu screen F2.Manual Setup2.HDMI Setup1.Speaker Setup4.ZONE2 Setup5.Option Setup3.Audio SetupOption SetupMake various other settings.a Amp AssignDefine how the amplifier for the surround back speaker channelsis used.The places where the surround back amplifier are used can be setfreely according to the usage environment. This makes it possible tooutput sound to rooms other than the room (the MAIN ZONE) wheresurround playback is performed (multi-zone playback) or play the soundwith high quality using the front speakers (bi-amp connections).[Selectable items]7.1ch : The surround back channel is output from thespeakers connected to the SURR.BACK/AMPASSIGN terminals.ZONE2 : When ZONE2 power is on, the ZONE2 channelis output from speakers connected to the SURR.BACK/AMP ASSIGN terminals.FrontA Bi-Amp : The Front A channel for Bi-Amp use is output fromthe speakers connected to the SURR.BACK/AMPASSIGN terminals.FrontB Bi-Amp : The Front B channel for Bi-Amp use is output fromthe speakers connected to the SURR.BACK/AMPASSIGN terminals.For details, see “Amp Assign / Multi-zone Connections and Operations”(vpage 65 ~ 68).2.Vol.Control3.Source Delete4.On-Screen Display5.Quick Select Name6.Remote ID Setup7.Display8.Setup Lock1.Amp Assign2-5.Option Setups Volume ControlSet the MAIN ZONE volume setting.Volume LimitMake a setting for maximum volume.[Selectable items]OFF : Do not set a maximum volume.–20dB : Set the maximum volume to –20 dB.–10dB : Set the maximum volume to –10 dB.0dB : Set the maximum volume to 0 dB.Power On LevelThis sets the volume set when the MAIN ZONE’s power is turnedon.[Selectable items]Last : Use the memorized setting from the last session.– – – : Always use the muting on condition when poweris turned on.[Variable range]–80dB ~ +18dB : Set the volume level when the power is turned onin units of 1 dB.Mute LevelThis sets the amount of attenuation of the volume when the mutemode is set in the MAIN ZONE.[Selectable items]Full : The sound is cut off entirely.–40dB : The sound is attenuated by 40 dB.–20dB : The sound is attenuated by 20 dB.[Selectable items]OFF : Do not set a maximum volume.–20dB : Set the maximum volume to –20 dB.–10dB : Set the maximum volume to –10 dB.0dB : Set the maximum volume to 0 dB.d Volume LimitMake a setting for maximum volume.Getting Started Connections Setup Playback Remote Control Multi-zone Information TroubleshootingENGLISH