Denon AVR-790 Owner's Manual

Also see for AVR-790: Specifications Specification Service manual Getting started Comparison chart

Denon AVR-790 Owner's Manual Manual pdf 37 page image

Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISH Multi-ZoneSetting items Setting contentsVideo SelectSwitch video input sourcewhile listening to audiosignal.Source : Play the picture and sound of the input source.DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video inputsource to view. This can be set for individual input sources.NOTEIt is not possible to select HDMI input signals.When playing HDMI video input signals, the analog video signal ofanother input source cannot be selected for the HDMI video output.Input sources for which “Delete” is selected at “Source Delete” (vpage30) cannot be selected.Input sources for which “None” is selected at “Assign” (vpage 33)cannot be selected.• This can also be set by pressing .• To cancel, press to select “Source”.••••i/p ScalerThe input source’s resolutionis converted to the resolutionset at “Resolution”.This can be set to the DVD HDP TV SAT/CBL VCR DVR V.AUXinput sources.OFF : Do not use i/p scaler function.Analog : Analog signals are converted to HDMI signals.Analog and HDMI : Both analog signals and HDMI signals are convertedto the desired HDMI resolution.ResolutionSet the output resolution.Resolution A : Analog VideoResolution H : HDMIThis can be set when the input source is set to DVD HDP TVSAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anythingother than “OFF”.AUTO : Detect monitor panel resolution and automatically set outputresolution.480p/576p / 1080i / 720p / 1080p : Select the output resolution.Progressive ModeSelect optimum progressivemode for video material.This can be set when the input source is set to DVD HDP TVSAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anythingother than “OFF”.AUTO : The video material is automatically detected and the appropriatemode is set.Video1 : Select mode suitable for video playback.Video2 : Select mode suitable for video and 30-frame film materialplayback.AspectSet the aspect ratio of thevideo signal output from theHDMI terminal.This can be set when the input source is set to DVD HDP TVSAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anythingother than “OFF”.Normal : Output at 4:3 aspect ratio.Full : Output at 16:9 aspect ratio.Making the video settings (Video)Default settings are underlined.Making the input settings (Input Setup)Setting items Setting contentsInput ModeSet the audio input modes forthe different input sources.Auto : Automatically detect input signal and perform playback.HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)Digital : Play only signals from digital input.Analog : Play only signals from analog input.EXT. IN : Play only signals from EXT. IN input.b Upon purchase, the settings of the different input sources are as shownbelow.Inputsource DVD HDP TV SAT/CBL VCRDefaultsetting Auto HDMI Digital Auto AnalogInputsource DVR V.AUX CD TUNERDefaultsetting Auto Analog Analog Analog• The “HDMI” settings are made for input sources for which HDMIinput terminals are assigned at “Assign” (vpage 33).• The “Digital” settings are made for input sources for which digitalinput terminals are assigned at “Assign” (vpage 33).• When a digital signal is properly input, the “ ” indicator lights onthe display. If the “ ” indicator does not light, check the digitalinput connector assignment and the connections.• The surround mode cannot be set if the input mode is set to “EXT.IN”.• This can also be set by pressing or .Each time you press the button, the input mode display will change.Auto HDMI DigitalAnalogEXT. INThe selectable input modes depend on the input source and “Assign” setting (vpage33 “Changing the input sources assigned to the input terminals”).Changing the Input Source’s Input Mode and Decoding mode(Input Mode) Default settings are underlined.The items that can be set depend on the input source and the “Assign” setting.: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSettings