Denon AVR-883 Service Manual

Also see for AVR-883: Operating instructions Operating instructions Brochure & specs

Contents

Denon AVR-883 Service Manual Manual pdf 2 page image

2AVR-1803/883SPECIFICATIONS Audio section• Power amplifierRated output: Front: 80W+80W (8 ohms, 20Hz~20kHz with 0.08% T.H.D.)110W+110W (6 ohms, 1kHz with 0.7% T.H.D.) (U.S.A., Canada, Europe, U.K. Models)130W+130W (6 ohms, EIAJ *) (Asia Model)Center: 80W (8 ohms, 20Hz~20kHz with 0.08% T.H.D.)110W (6 ohms, 1kHz with 0.7% T.H.D.) (U.S.A., Canada, Europe, U.K. Models)130W (6 ohms, EIAJ *) (Asia Model)Surround: 80W+80W (8 ohms, 20Hz~20kHz with 0.08% T.H.D.)110W+110W (6 ohms, 1kHz with 0.7% T.H.D.) (U.S.A., Canada, Europe, U.K. Models)130W+130W (6 ohms, EIAJ *) (Asia Model)Surround Back: 80 W (8 ohms , 20 Hz ~ 20 kHz with 0.08% T.H.D.)110 W (6 ohms , 1 kHz with 0.7% T.H.D.)130W (6 ohms, EIAJ *) (Asia Model)Dynamic power: 100 W x 2 ch (8 ohms)145 W x 2 ch (4 ohms)170 W x 2 ch (2 ohms)Output terminals: Front, Center, Surround: 6 ~ 16 ohmsSurround Back: A or B 6 ~ 16 ohmsA + B 12 ~ 16 ohmsInput sensitivity / input impedance: 200 mV / 47 kohmsFrequency response: 10 Hz ~ 100 kHz: +1, -3 dB (DIRECT mode)S/N: 100 dB (IHF-A weighted) (DIRECT mode)• Phone equalizer (PHONE input  REC OUT)Input sensitivity: 2.5 mVRIAA deviation: ±1 dB (20 Hz to 20 kHz)Signal to noise ratio: 74 dB (A weighting, with 5 mV input)Rated output / Maximum output: 150 mV / 7 VDistortion factor: 0.03% (1 kHz, 3 V) Video section• Standard video jacksInput / output level and impedance: 1 Vp-p, 75 ohmsFrequency response: 5 Hz ~ 10 MHz  +1, -3 dB• S -video jacksInput / output level and impedance: Y (brightness) signal  1 Vp-p, 75 ohmsC (color) signal  0.286 Vp-p, 75 ohmsFrequency response: 5 Hz ~ 10 MHz  +1, -3 dB• Color component video jacksInput / output level and impedance: Y (brightness) signal  1 Vp-p, 75 ohmsP B /CB (blue) signal  0.7 Vp-p, 75 ohmsP R/C R (red) signal  0.7Vp-p, 75 ohmsFrequency response: 5 Hz ~ 27 MHz  +1, -3 dB* EIAJ: It is the standard which JEITA (Japan Electronics & Information Technology Industries Association) enacted.SAFETY PRECAUTIONSThe following check should be performed for the continued protection of the customer and service technician.LEAKAGE CURRENT CHECKBefore returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassisresistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of thepower cord is less than 460 kohms, the unit is defective.www . xiaoyu163. comQQ 376315150 992894298TEL 13942296513 992894298051513673QQTEL 13942296513 QQ 376315150 892498299TEL 13942296513 QQ 376315150 892498299http://www.xiaoyu163.comhttp://www.xiaoyu163.com