Denon AVR-889 Owner's Manual

Also see for AVR-889: Product Compatibility Chart Comparison chart Getting started Getting started guide Service manual

Denon AVR-889 Owner's Manual Manual pdf 14 page image

ENGLISHGetting Started Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications• Select the terminal to use and connect the device (vpage 8 “VideoConversion Function”).• With HDMI connections, the video and audio signals can betransferred with a single cable.• To output the audio signals to the monitor with HDMI connections,set menu “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” to“TV” (vpage 26).• When you want to listen to TV audio by AVR-889, connect opticaldigital or analog.If the TV you are using has both connection jacks, use the opticaldigital connection.Connecting the MonitorRLRL47*%&0065"6%*07*%&0$0.10/&/57*%&0: 1# 137*%&0065 065"6%*0 $0"9*"-0653-065065)%.*Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.Connecting the Playback ComponentsBlu-ray Disc player / DVD playerSelect the terminal to use and connect the device.Blu-ray Disc player / DVD playerNOTE• The component video connectors may be indicated differently onyour monitor. For details, see the monitor’s operating instructions.• The audio signals output from the HDMI connectors are only theHDMI input signals.When using an optical cable for the digital audio connection, make thesettings at menu “Input Setup” – “Assign” – “Digital In” (vpage34).b When connected to a Blu-ray Disc player, and playing DolbyTrueHD, DTS-HD, Dolby Digital Plus, connect the HDMI.b47*%&0*/7*%&0$0.10/&/57*%&0: 1# 137*%&0*/)%.**/ */MonitorRecord Player• When connecting a record player with an MC cartridge, use acommercially available MC head amplifier or a step-up transformer.• Induction humming (a booming sound) may be produced from thespeakers if the volume is raised with no record player connected.• With some record players, noise may be generated when the groundwire is connected. If so, disconnect the ground wire.• When using a record player with a built-in PHONO equalizer, set thePHONO equalizer to “OFF”.(/%"6%*0065RLTurntable (MM cartridge)NOTEThe AVR-889’s SIGNAL GND terminal is meant to reduce noise whena record player is connected. This is not a safety ground terminal.Connections