Denon AVR-889 Owner's Manual

Also see for AVR-889: Product Compatibility Chart Comparison chart Getting started Getting started guide Service manual

Denon AVR-889 Owner's Manual Manual pdf 50 page image

ENGLISHGetting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications4 Tune in the desired broadcast station.q To tune in automatically (Auto Tuning)Press [MODE] to light the “AUTO” indicator on the display, thenuse TUNING to select the station you want to hear.w To tune in manually (Manual Tuning)Press [MODE] to turn off the display’s “AUTO” indicator, then useTUNING to select the station you want to hear.Playing Video and AudioEquipment1 Prepare the equipment.q Load the BD, DVD, CD or other software in the player.(vSee the operating instructions of the respective equipment.)w To play a video equipment, switch the monitor input.(vSee the monitor’s operating instructions.)2 Use SOURCE SELECT to select the input source.3 Start playback.(vSee the operating instructions of the respective equipment.)Basic Operation• If the desired station cannot be tuned in with auto tuning, tune it inmanually.• When tuning in stations manually, press and hold TUNING to changefrequencies continuously.• The time (default : 30 sec) for which the on-screen display aredisplayed can be set at “Manual Setup” – “Option Setup” – “On-Screen Display” (vpage 29).Press uio p to return to the original screen.BAND TUNING SHIFT uiopSOURCE SELECTSHIFTTUNING[SOURCECONTROL 1][SOURCECONTROL 2]uiop[TUNER][SAT TU 1/2][CHANNEL +/–]SOURCE SELECTTUNING[MODE][MEMORY][TUNER]BAND[SAT TU 1/2]uiop[Front][Rear]The remote control unit can be used to operate external devices.See “Remote Control Unit Operations” (vpage 56).1 Either turn or press [TUNER] toselect “TUNER”.2 Set [SOURCE CONTROL 1] to “AUDIO” and [SOURCECONTROL 2] to “TUNER”.(vpage 56 “Remote Control Unit Operations”)3 Press BAND to select “FM” or “AM”.Listening to FM/AM BroadcastsBasic OperationPresetting Radio Stations(Preset Memory)Your favorite broadcast stations can be preset so that you cantune them in easily. Up to 56 stations can be preset.1 Tune in the broadcast station you want to preset.2 Press [MEMORY].3 Press SHIFT to select the block (A to G) in which thestation is to be preset.4 Press or [CHANNEL +/–] to select thepreset number (1 to 8).5 Press [MEMORY] again to complete the setting.• To preset other stations, repeat steps 1 to 5.• Stations can be preset automatically at menu “Input Setup” – “AutoPreset” (vpage 32).NOTEPreset stations are erased by overwriting them.PlaybackButton located on both the main unitand the remote control unit BUTTONButton only on the main unit