Denon AVR-982 Operating Instructions Manual

Also see for AVR-2802: Operating instructions Operating instructions Brochure & specs Operating instructions Service manual

Contents

Denon AVR-982 Operating Instructions Manual Manual pdf 35 page image

14®os( }2 31,5 _o o oPress the USE/LEARN selector button with the tip of a pen,etc., to set the learn mode.4To clear "learned" remote control signals, set the slide switchto the position at which the signals were "learned".AUDIOSet the slide switch to the position at which the signals were"learned".T_E CD_MDD_Y'TT_VDP VCRPress the SYSTEM CALL SET button, and hold it in for at leastfour seconds.• When both the START and LEARNEDfrX LEDs lightsimultaneously, all the stored codes are cleared.@hPress the USE/LEARN selector button.[] OPERATIONRefer to "CONNECTIONS" (pages 6 to 13) and check that allconnections are correct.Set the remote control unit's slide AUO_OSWitCh tO the AUDIO position. (onlywhen operating with the remotecontrol unit)Turn on the power.Press the POWER switch (button).oN JSTANDByON/STANDBY(Mainurlit) (Remotecontrolunit)When pressed, the power turns on and the display lights. The soundis muted for several seconds, after which the unit operates normally.When pressed again, the power turns off, the standby mode is setand the display turns off.Whenever the ON/STANDBY button is in the STANDBY state, theapparatus is still connected on AC line voltage. Please be sure tounplug the cord when you leave home for, say, a vacation.4 Select the front speakers.Press SPEAKER A or B turn the speaker on.SPEAKERO OA m SPEAKER@@0_4 _ _ 5 _2