Denon AVR-A100 Owner's Manual

Also see for AVR-A100: Owner's manual Addendum sheet

Denon AVR-A100 Owner's Manual Manual pdf 32 page image

28ENGLISHPlayback (Basic operation)n Playing a Blu-ray Disc player/DVD player(vpage 29)n Playing a CD player (vpage 30)n Playing an iPod® (vpage 30)n Tuning in radio stations (vpage 33)n Playing a network audio (vpage 37)n Playing a USB memory device (vpage 48)Selecting a listening mode (Surround Mode)(vpage 50)n Selecting the input source (vpage 28)n Adjusting the master volume (vpage 28)n Turning off the sound temporarily (vpage 29)Playback (Advanced operation) (vpage 65)Important informationBefore starting playback, make the connections between the differentcomponents and the settings on the receiver.NOTEAlso refer to the operating instructions of the connected componentswhen playing them.Selecting the input sourcePress the input source select button(NET/USB, iPod, DVD, BD,TUNER/DTU, DOCK, SAT TU,SAT/CBL, GAME, V.AUX, PHONO,CD, DVR, TV) to be played back.The desired input source can be selecteddirectly.Display the selected input source name onthe remote control unit.• When iPod PLAY is pressed, the input source of this unit isswitched to “DOCK” or “NET/USB” and the connected iPod isautomatically played (vpage 33 “iPod play function”).You can also use the following operation to select an inputsource.n Using the “SOURCE SELECT” menuSwitch the main remote control unit to the M (MAIN ZONE) modewhen performing this operation (vpage 108 “Operating the mainremote control unit”).If the main remote control unit is in “ZONE2”or “ZONE3” mode,the “SOURCE SELECT” menu will not be displayed when SOURCESELECT is pressed.q Press SOURCE SELECT.Display the “SOURCE SELECT” menu.SOURCE SELECTSource SAT/CBLRecentPlayerVideoNetworkTunerEnterMoveThe currently selected inputsource is highlighted.qweq Input SourceThe name of the highlighted input source is displayed.w Recently used sourcesThe recently used input sources (up to fi ve) are displayed.e Icons for the input sources in the different categories aredisplayed.w Use uio p to select the input source,then press ENTER.The input source is set and the sourceselection menu is turned off.• When using with an iPod connected directly to the USB port of thisunit, select “ (USB/iPod)” for the input source.• Input sources that are not going to be used can be set ahead of time.Make this setting at “Source Delete” (vpage 104).• To turn off the source selection menu without selecting an inputsource, press SOURCE SELECT again.• When SOURCE SELECT is pressed, the AMP-operation mode startsautomatically (vpage 108).n Using the knob on the main unitTurn SOURCE SELECT.• If “Rec Select” or “Tuning Preset”mode is selected for the inputsource, press SOURCE beforeturning SOURCE SELECT.• Turning SOURCE SELECT switchesthe input source, as shown below.BD DVD TV SAT/CBL GAMEDVR V.AUXPHONO HD Radio SIRIUS NET/USB DOCKCDAdjusting the master volumeUse VOL df to adjust the volume.n When the “Volume Display” setting(vpage 104) is “Relative”GAdjustable rangeH– – – –80.5dB – 18.0dBn When the “Volume Display” setting (vpage 104) is“Absolute”GAdjustable rangeH 0.0 – 99.0• The variable range differs according to the input signal and channellevel setting.You can also operate via the main unit.In this case, perform the followingoperations.Turn MASTER VOLUME to adjust thevolume.