Denon AVR-E200 Owner's Manual

Also see for AVR-E200: Getting started Service manual Service manual Getting started

Contents

15Playback (Basic operation)n Playing a Blu-ray Disc player/DVD player(vpage 16)n Playing a portable player (vpage 16)n Tuning in radio stations (vpage 17)Selecting a listening mode (Surround mode)(vpage 19)n Turning the power on (vpage 15)n Selecting the input source (vpage 15)n Adjusting the master volume (vpage 16)n Turning off the sound temporarily (vpage 16)n Switching the brightness of the display(vpage 16)Playback (Advanced operation) (vpage 27)Important informationBefore starting playback, make the connections between the differentdevices and the settings on the unit.NOTEAlso refer to the operating instructions of the connected deviceswhen playing them.Turning the power onPress POWER X to turn on power tothe this unit.The power indicator flashes green and thepower turns on.You can also switch the power to standby by pressing X on the mainunit.n When power is switched to standbyPress POWER X.GPower indicator status in standby modeH• Normal standby : Off• When “Pass Through” (vpage 38) is set to “On” : RedSelecting the input sourcePress the input source select button(CBL/SAT, DVD, Blu-ray, GAME,AUX, PORTABLE, TV AUDIO orTUNER) to be played back.The desired input source can be selecteddirectly.You can also use the following operation to select an inputsource.n Select the input source using the main unitUse SOURCE SELECT 0 1.• Use SOURCE SELECT 0 1 switches the input source, as shownbelow.Blu-rayDVDTUNERTV AUDIO AUXCBL/SAT GAMEPORTABLE