Denon AVR-E200 Owner's Manual

Also see for AVR-E200: Getting started Service manual Service manual Getting started

Contents

17Tuning in radio stationsFor antenna connections, see “Connecting an FM/AM antenna”(vpage 13).How to tune inThe modes for receiving FM/AM broadcasts consists of “AUTO”mode that automatically searches available broadcast stations and“MANUAL” mode that lets you tune in using buttons to change thefrequency. The default setting is “AUTO”.In “AUTO” mode, you cannot tune in to radio stations if the receptionis not good. If this is the case, then use the “MANUAL” to tune in.Listening to FM/AM broadcasts1 Press TUNER to switch the inputsource to “TUNER”.2 Press BAND to select “FM” or“AM”.FM When listening to an FM broadcast.AM When listening to an AM broadcast.GTV ScreenHTUNERA1TuningPresetBandMemoryModeFM 92.1MHzAUTONow PlayingTUNE BANDCHANNELMODEMEMORYGDisplay of this unitHA1 FM 92.1MHz3 Tune in the desired broadcast station.AUTO Automatically tune to the station.q Press MODE to select “AUTO”.MODE:AUTOw Press TUNE + or TUNE – to select the station you want tohear.• The frequency changes in steps each time the button ispressed.MANUAL Manually tune to the station.q Press MODE to select “MANUAL”.MODE:MANUALw Press TUNE + or TUNE – to select the station you want tohear.• The frequency changes in steps each time the button ispressed.When tuning in stations manually, press and hold TUNE + orTUNE – to change frequencies continuously.n Presetting radio stations (Manual preset)Your favorite broadcast stations can be preset so that you can tunethem in easily. Up to 56 stations can be preset.• Stations can be preset automatically at “Auto Preset”(vpage 32). If “Auto Preset” is performed after performing“Manual preset”, the “Manual preset” settings will be overwritten.1 Tune in the broadcast station youwant to preset.2 Press MEMORY.GTV ScreenHTuningPresetBandMemoryModeTUNESHIFTBANDCHANNELCHANNELMODEMEMORYMEMORYTUNERA1To store preset:select A1-G8GDisplay of this unitHStoring Station3 Press CHANNEL + or CHANNEL – to select the presetnumber.• Press SHIFT, and then the block (A – G) can be selected.4 Press MEMORY again to complete the setting.• To preset other stations, repeat steps 1 to 4.