Procedure for speaker settings (AutoSetup).FinishMeasurementPreparation1 Mount the Sound calibration microphone on a tripodand place it in the main listening position.When installing the Sound calibration microphone, point the tip ofthe microphone toward the ceiling and adjust the height to match theheight of the ears of a listener in a seated position.2 If using a subwoofer capable of the followingadjustments, set up the subwoofer as shown below.n When using a subwoofer with a direct modeSet the direct mode to “On” and disable the volume adjustmentand crossover frequency setting.n When using a subwoofer without a direct modeMake the following settings:0 Volume : 12 o’clock position0 Crossover frequency : Maximum/Highest Frequency0 Low pass filter : Off0 Standby mode : OffContents Connections Playback Settings Tips Appendix80Front panel Display Rear panel Remote Index
