ZONE2 SetupMakes settings for audio playback with ZONE2.0 Values set for “Volume Limit” and “Pow.On Volume” are displayed according to thesetting specified for the volume “Scale” (v p. 157).o Volume LevelSet the volume output level.Variable(Default) : Volume can be adjusted.1 – 98(–79.5 dB – 18.0 dB):Volume is fixed at the desired level. Thevolume cannot be adjusting using theremote control unit.o Volume LimitMake a setting for maximum volume.60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)(Default : 70 (-10 dB))Off: Do not set a maximum volume.0 This can be set when “Volume Level” is set to “Variable”. (v p. 209)o Pow.On VolumeDefine the volume setting that is active when the power is turned on.Last(Default) :Use the memorized setting from the lastsession.Mute: Always use the muting on condition.1 – 98(–79.5 dB – 18.0 dB): The volume is adjusted to the set level.0 This can be set when “Volume Level” is set to “Variable”. (v p. 209)Contents Connections Playback Settings Tips Appendix209Front panel Display Rear panel Remote Index
