Denon AVR-X1200W Service Manual

Also see for AVR-S710W: Quick start guide Model information Owner's manual Owner's manual Quick start guide

Contents

Denon AVR-X1200W Service Manual Manual pdf 11 page image

TECHNICAL SPECIFICATIONS FOR AVR-S710Wn Audio section• Power amplifierRated output :Front :75 W + 75 W ( 8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.)110 W + 110 W ( 6 Ω, 1 kHz with 0.7 % T.H.D.)Center :75 W ( 8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.)110 W ( 6 Ω, 1 kHz with 0.7 % T.H.D.)Surround :75 W + 75 W ( 8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.)110 W + 110 W ( 6 Ω, 1 kHz with 0.7 % T.H.D.)Surround back :75 W + 75 W ( 8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.)110 W + 110 W ( 6 Ω, 1 kHz with 0.7 % T.H.D.)Output connectors : 4 - 16 Ωn Analog sectionInput sensitivity/Input impedance : 200 mV / 47 kΩFrequency response : 10 Hz - 100 kHz — +1, -3 dB (Direct mode)S/N ratio : 98 dB (IHF-A, Direct mode)n Video section• Color component video connectorInput/output level and impedance : 1 Vp-p, 75 ΩFrequency response : 5 Hz - 10 MHz — 0, –3 dBn Tuner section(Note : μV at 75 Ω, 0 dBf = 1 x 10 –15 W)Reception frequency range : FM 87.5 MHz - 107.9 MHzAM 520 kHz - 1710 kHzEffective sensitivity : FM 1.2 μV (12.8 dBf)AM 18 μV50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf)S/N ratio : MONO ― 70 dB (IHF–A weighted, Direct mode)STEREO ― 67 dB (IHF–A weighted, Direct mode)Distortion : MONO ― 0.7 % (1 kHz)SRETEO ― 1.0 % (1 kHz)n Wireless LAN sectionNetwork type (wireless LAN standard) : Conforming to IEEE 802.11bConforming to IEEE 802.11gConforming to IEEE 802.11n(Wi-Fi® compliant)z1Security : WEP 64 bit, WEP 128 bitWPA/WPA2-PSK (AES)WPA/WPA2-PSK (TKIP)Radio frequency : 2.4 GHzNo. of channels : 1 - 11 chz1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logoare registered trademarks of the Wi-Fi Alliance.n Bluetooth sectionCommunications system : Bluetooth Version 2.1 + EDR(Enhanced Data Rate)Transmission power : Maximum 2.5 mW (Class 2)Maximum communication range : Approx. 32.8 ft/10 m in line of sightz2Frequency band : 2.4 GHz bandModulation scheme : FHSS (Frequency-Hopping Spread Spectrum)Supported profiles : A2DP (Advanced Audio Distribution Profile)1.2AVRCP (Audio Video Remote Control Profile)1.4Corresponding codec : SBC, AACTransmission range (A2DP) : 20 Hz - 20,000 Hzz2 The actual communication range varies depending on the influence ofsuch factors as obstructions between devices, electromagnetic wavesfrom microwave ovens, static electricity, cordless phones, receptionsensitivity, antenna performance, operating system, applicationsoftware etc.n GeneralPower supply : AC 120 V, 60 HzPower consumption : 400 WPower consumption in standby mode : 0.1 WPower consumption in CEC standby mode : 0.5 WPower consumption in network standby mode : 2.7 WFor purposes of improvement, specifications and design are subject tochange without notice.11