Output SettingsMakes settings for video output.0 “Output Settings” cannot be set when 4K signals are input.0 “i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect Ratio” settings arestored for each input source. (“i/p Scaler” (v p. 160), “Resolution” (v p. 161),“Progressive Mode” (v p. 161), “Aspect Ratio” (v p. 161))o HDMI Video OutputSelect the HDMI monitor connector to be used.Auto(Dual)(Default):The presence of a TV connected to theHDMI MONITOR 1 or HDMI MONITOR 2connector is detected automatically, andthat TV connection is used.Monitor 1: A TV connected to the HDMI MONITOR1 connector is always used.Monitor 2: A TV connected to the HDMI MONITOR2 connector is always used.0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors areconnected and “Resolution” is set to “Auto”, the signals are output with aresolution that is compatible with both TVs. (v p. 161)When the “Resolution” setting in the menu is not set to “Auto”, set theresolution in “Video” - “HDMI Monitor 1” and “HDMI Monitor 2” to one that iscompatible with both TVs. (v p. 207)0 You can check which resolutions are compatible with your TV in “HDMIMonitor 1” and “HDMI Monitor 2”. (v p. 207)0 When connecting multiple Dolby Vision TVs, the signal will only be optimal forone TV. A TV connected to the HDMI MONITOR 1 connector has priority.Contents Connections Playback Settings Tips Appendix159Front panel Display Rear panel Remote Index
