8 Move the Sound calibration microphone to position 2,select “Continue”, then press ENTER.The measurement of the second position starts.Measurements can be made in up to eight positions. .ContinuePlace the microphone ear level of the listener seated at the2nd listening position, which should be no more than 2ft(60cm) away from the 1st position, then select “Continue”...Audyssey SetupBackEar Heightn Stopping Audyssey® SetupA Press BACK to display the popup screen.B Press o to select “Yes”, then press ENTER.9 Repeat step 8, measuring positions 3 to 8.0 To skip measuring the fourth and subsequent listening position, press o toselect “Complete” and press ENTER to proceed to step 11.10 Select “Continue”, then press ENTER. .Audyssey SetupContinueRepeat Last TestMeasurements complete.Select “Continue” to analyze the data...Start the analysis and storage of the measurement results.0 Analysis takes several minutes to complete.The more speakers and measurement positions that there are,the more time it takes to perform the analysis.NOTE0 When the measurement results are being saved, make sure the power isnot turned off.Contents Connections Playback Settings Tips Appendix174Front panel Display Rear panel Remote Index
