AudysseySet Audyssey MultEQ® XT, Audyssey Dynamic EQ® and AudysseyDynamic Volume®. These can be selected after Audyssey® Setup hasbeen performed.For additional information on Audyssey technology, please see“Explanation of terms” (v p. 255).0 “MultEQ® XT”, “Dynamic EQ” and “Dynamic Volume” settings are stored for eachinput source.0 When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ® XT”,“Dynamic EQ” and “Dynamic Volume” settings cannot be configured.o MultEQ® XTMultEQ® XT compensates for both time and frequency characteristicsof the listening area based on Audyssey® Setup measurement results.Selection is done from three types of compensation curves. Werecommend the “Reference” setting.Reference(Default):Selects the default calibrated setting witha slight roll off at high frequencies, whichis optimized for movies.L/R Bypass:Selects the reference setting, butbypasses MultEQ® XT on the front leftand right speakers.Flat:Selects the calibrated setting which isoptimized for small rooms where yourlistening position is closer to thespeakers.Off : Do not use “MultEQ® XT”.When using headphones, “MultEQ® XT” is automatically set to “Off”.Contents Connections Playback Settings Tips Appendix159Front panel Display Rear panel Remote Index
