o Power On DefaultSet the mode to ECO when the power is on.Last(Default) :The ECO Mode will be set to the previoussetting before the power was switched off.On:When power is turned on, the mode willalways be switched to the ECO Mode in“On”.Auto:When power is turned on, the mode willalways be switched to the ECO Mode in“Auto”.Off:When power is turned on, the mode willalways be switched to the ECO Mode in“Off”.o On Screen DisplayDisplay the power consumption of this unit using a meter on the TVscreen.Always On: Always display the meter on the TV screen.Auto(Default):Display the meter when changing the modeor volume.Off: Do not display the meter.o Auto StandbySet so the unit power automatically switches to standby.n MAIN ZONESets the time for switching to auto standby when there are no audio orvideo signals input into this unit.Before the unit enters standby mode, “Auto Standby” is displayed onthe unit display and the menu screen.60 min: The unit goes into standby after 60 minutes.30 min: The unit goes into standby after 30 minutes.15 min: The unit goes into standby after 15 minutes.Off(Default):The unit does not go into standbyautomatically.n ZONE2When there are no operations for a certain period of time as set here,the power is automatically shut off even if there is audio or video input.8 hours: Put ZONE2 in the standby state after about 8hours.4 hours: Put ZONE2 in the standby state after about 4hours.2 hours: Put ZONE2 in the standby state after about 2hours.Off(Default):Do not automatically put ZONE2 in thestandby state.Contents Connections Playback Settings Tips Appendix206Front panel Display Rear panel Remote Index