o Connecting the speaker cablesCarefully check the left (L) and right (R) channels and + (red) and –(black) polarities on the speakers being connected to this unit, and besure to connect the channels and polarities correctly.1 Peel off about 10 mm of sheathing from the tip of thespeaker cable, then either twist the core wire tightly orterminate it. .2 Turn the speaker terminal counterclockwise to loosen it. .3 Insert the speaker cable’s core wire to the hilt into thespeaker terminal. .4 Turn the speaker terminal clockwise to tighten it. .o Connecting the subwooferUse a subwoofer cable to connect the subwoofer. Two subwoofers canbe connected to this unit.To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “SpeakerConfig.” setting. (v p. 220)The level and distance can be set separately for Subwoofer 1 andSubwoofer 2. .ASSIGNABLE ASSIGNABLE ASSIGNABLESPEAKERS IMPEDANCE : 4㹼16ȐCENTER SURROUND SURROUND BACKSURROUNDFRONT SURROUND BACK FRONT WIDE/HEIGHT2FRONT WIDE/HEIGHT2 HEIGHT1 HEIGHT1FRONT1 CBL/SAT1 CBL/SAT 2 DVD2CD1TVAUDIO6 MEDIA PLAYER2 DVD1 23 Blu-ray5 CD4 GAME(ASSIGNABLE)DIGITAL AUDIORS-232CREMOTE CONTROLTRIGGER OUT COAXIALOPTICALSTRAIGHT CABLEIRDC12V 150mA MAX.ZONE2 ZONE3FRONTSURROUNDFRONT WIDECENTERHEIGHT1SURROUND BACK HEIGHT21SUBWOOFERPRE OUT(ASSIGNABLE)AUDIO2PHONOAUDIOSW1 SW2Contents Connections Playback Settings Tips Appendix36Front panel Display Rear panel Remote Index
