Denon D-T1 Owner's Manual
Also see for D-T1: Quick start guideService manualQuick start guide
                                                                        | |
Contents
| 
TroubleshootingIf a problem should arise, first check the following.1. Are the connections correct?2. Is the set being operated as described in the owner’s manual?3. Are the other devices operating properly?If this unit does not operate properly, check the items listed in the table below.Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.o Power does not turn on / Power is turned offSymptom Cause / Solution PagePower does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 220 This unit is in standby mode. Press X on the unit or POWER X on the remote control. 24Power automatically turnsoff.0 The sleep timer is set. Turn on the power again. 470 The unit is set to Auto standby mode. The Auto standby mode automatically switches the unit to standbyif there is no signal and no operations are performed for more than 15 minutes. To disable Auto standbymode, press and hold the POWER X button on the remote control for more than 3 seconds when theAuto standby mode is enabled.48Contents Connections Playback Settings Tips Appendix51Front panel Rear panel Remote controlunit Index |
Related manuals for Denon D-T1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine