Denon DCD-1500AE Operating Instructions Manual

Also see for DCD-1500AE: Operating instructions Service manual

Contents

ENGLISHOperationOpening and closing the disc holder andloading discs1 Press the POWER switch to turn on the power.2 Press the 55 button.• Pick up the disc carefully so as not to touch thesignal surface and hold it with the labeled side facingup.• With the disc holder fully open, set the disc in thedisc holder.• Set 12 cm discs in the outer disc guide, 8 cm discsin the inner disc guide.3 Press the 55 button.The disc is automatically loaded.NOTE:• If your finger should get caught in the disc holder when itcloses, press the 5 button.The disc holder closes automatically if the 1/ 3 buttonis pressed.POWER SUPER AUDIO CDSET UPREPEATRANDOMCALLDIRECT PROGRAMA - BDISPLAY TIMEOPEN / CLOSE1 2 34 5 67 8 90 +10 CLEARARTISTTITLESUPERAUDIO CDSETUPOPEN/CLOSENUMBERSUPER AUDIO CDSETUP+10Normal playback• The layer for top priority playback after the disc is loaded can be set.• The layer set for top priority playback upon shipment from the factory (default setting) is the Super Audio CD (stereo) layer.Setting the top priority playback layer forSuper Audio CDs1 Press the POWER switch to turn on the power.2 Check that no disc is loaded.3 Press the SUPER AUDIO CD SETUP button andswitch to the layer you want to set.If the layer is switched while the disc is being loaded,the playback layer switches for that disc, but the toppriority playback layer setting itself does not change.When a disc is loaded after the setting has been made,the contents recorded on the set layer are displayed.If a disc that does not contain the layer set for toppriority playback is loaded, the contents recorded onanother layer are displayed automatically.This setting is stored in the memory and is not clearedeven when the disc holder is opened or closed or thepower is turned off. To change the setting, repeat theprocedure above.Outer disc guide12cm discDisc holder7ENGLISHDownloaded From Disc-Player.com Denon Manuals