Denon DCD-500AE Operating Instructions Manual

Also see for DCD-500AE: Service manual User manual

Contents

Signal directionAudio cableConnections6ENGLISHENGLISHCable indicationsConnectionsNOTE:• Do not plug in the power supply cord until all connections have been completed.• When making connections, also refer to the operating instructions of the other components.• Be sure to connect the left and right channels properly (left with left, right with right).• Making connections with the power turned on could result in noise or damage the speakers.• Bunching the power supply cords and connection cables together could result in humming or noise.Connect using the connection cables shown below.Analog connections (Stereo)ARLRLPin-plug cableDigital connections (Optical)BOptical fiber cableAudio signalOUT IN(White)(Red)ARLAUDIO INRLRLAnalog connectionsStereo amplifierBOPTICALINDigital connectionsCD recorder, etc.There is a protective cap over the optical digital output terminal. Remove the protective cap and insert theplug firmly until it locks.¢ When connecting the optical digital output connector with an opticaltransmission cable (commercially available)Match theshapesMatch the shapes then insert firmly all the way in. • Store the protective cap in a safe place so as notto lose it, and use it when not using the terminal.Connecting the power supply cordAC 230 V, 50 HzNOTE:• Insert the plugs securely. Incomplete connections will result in the generation of noise.• Do not unplug the power supply cord while the set is operating.AC outlet(wall)