| 
7ENGLISHENGLISHTurning the power on2[1][3][6]5[7]TIME<1/ 3> 25TIMEAbout the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitOperationPress .• When a disc is loaded, playback starts automatically.• If no disc is loaded “NO DISC” is displayed.¢ To turn off the power:Press again.NOTE:• To turn off the power while a disc is playing, be sure to press 2to stop playback before turning off the power.Loading discsPress 5 to open the disc tray.( page 2)¢ To close the disc tray:Press 5 again.NOTE:• Be sure to turn on the power when opening and closing the disctray.• Do not push the disc tray in by hand when the power is off. Doingso could damage it.• Do not insert foreign objects into the disc tray. Doing so willdamage it.Starting playbackPress <1/3> or [1].• The “1” indicator lights and playback starts.Once all the tracks remove recorded on the disc have beenplayed, the stop mode is set automatically.TIME can be used to switch the information displayed.To stop playbackPress 2 during playback.To pause playbackPress <1/3> or [3] during playback.• The “3” indicator lights and the pause mode is set.¢ To resume playback:Press <1/3> or [1].Fast-forwarding and fast-reversing throughtracks (Search)Press and hold [6] or [7] during playback.Normal playback resumes when you release your finger from thebutton.• The sound may be interrupted shortly when resuming normalplayback after searching.Elapsed time ofcurrently playingtrackRemaining time ofcurrently playingtrackRemaining time of all remaining tracksDuring programmed playback, the remaining time of all theprogrammed tracks is displayed. |
