Denon DCD-F107 Service Manual

Also see for DCD-F107: Owner's manual Owner's manual

Contents

15DCD-F1072.7 Adjustment valuedisplayu RFRPi Return to q.(Note) If auto adjustment is not completed, propervalues are not displayed.uXX : Adjustment value2.8Accumulatedlaser on timedisplayWhen the DISC/USB and 5 button is pressedwhile the DCD-F107 is in the stop mode, theaccumulated laser on time is displayed.The laser drive times are added and the result isdisplayed.One count corresponds to 10 minutes. (Valuesunder 10 minutes are discarded.)Count values are stored in the EEPROM every 10minutes.The accumulated laser on time is displayed inhours.Laser ON/OFF is monitored and counted.Press the 2 button, CD test mode display (2)reappears.The count values are not cleared, even when theset is reset.Minimum display specification• No. digits stored in EPROM: 4, 0xFFFF• No. digits displayed: 5• When the time exceeds 10922 hours, thestored data is not updated and the value isfixed to 0xFFFF.(The display is fixed to 10922 hours.)q Count value is resetWhen the /1 3 button is pressed for over 5seconds while the accumulated laser on time isdisplayed, the count value is reset.After resetting is completed, the display in 2.6(00000 hours on the top line) reappears.Count value is reset upon shipment from thefactory and when the mechanism is replaced.13 flashingq3 CD heat runmodeAC is turned on while pressing the 5 and 2 buttonsame time on DCD-F107.Switches to mode according to button input.Press the reverse button to switch the mode whiledisplaying the version of the main com.(Normal heat run mode, Heat run short mode,Automatic mounting mode.) dIf an error occurs, display the error and stopoperation at that point.Number of operations held.While heat run, the operation of each button is notvalid except the ON/STANDBY button andpressing the 5 and 2 button same time.No Key name Function DisplayXXRFRPXXXXX hourLASER ON TIMECLEARLASER ON TIME