Denon DCM-27 Operating Instructions Manual

Also see for DCM-27: Operating instructions Operating instructions Code List Service manual Service manual

Contents

Operation Operation8ENGLISHENGLISHStarting playbackPress 2 during playback.• Playback stops.Press 3 during playback.• Playback pauses.¢ To resume playback:Press 1.Press [9] or <7/9> during playback.• The pickup will advance to the beginning of the next track andplayback will continue. Pressing the button several times willforward the pickup the corresponding number tracks.Normal playback resumes when you release your finger from thebutton.Press 1.• The drawer closes and the disc just loaded is played.• Playback starts.If 5 is pressed while a disc is playing, playback continues, but thedrawer opens and four discs can be replaced. The disc that canbe replaced switches when DISC SKIP is pressed.Playback stops automatically after the last track on the disc hasbeen played.Various playback functionsPlaying the desired disc and desired track[Direct play]Press [DISC SELECT].Use [NUMBER] (1 to 5) to select the disc.12Use [NUMBER] (0 ~ 9, +10) to select the track.Example: To play the 4th track on the 3rd disc:Press [DISC SELECT] [3] [4].Example: To play the 12th track on the 5th disc:Press [DISC SELECT] [5] [+10] [2].3Playback begins from the number of the disc andtrack selected.4To move to the next disc during playbackPress DISC SKIP.The carousel in the drawer turns and the disc on the next tray isplayed.11st disc 2nd disc4th disc5th disc3rd discTo stop playbackPress [8] or <8/6> during playback.• The pickup will advance to the beginning of the next track andplayback will continue. Pressing the button several times willforward the pickup the corresponding number tracks.Use this function to stop playback temporarily, and later resumeplayback from that point.• When [DISC SKIP–] on the remote control unit is pressed, thecarousel turns in the opposite direction and the previous disc isplayed.To pause playbackAutomatic search¢ Moving ahead to the beginning of the next track(file):¢ Moving back to the beginning of the current track(file):