Denon DCM-280 Operating Instructions Manual

Contents

ENGLISH17Keep on pressing the 8/6 button for more than 0.5 secondsduring playback. Reverse playback of the track is sped up.• As a reference, the current track number and elapsed playback timewithin the track are displayed.• Manual search in reverse is approximately 4 times faster when the8/6 button is kept on pressing more than 5 seconds.• If the 8/6 button is kept pressed after the beginning of thefirst track on the disc is reached, “ ” is displayed and manualsearch stops. To return to another point, press the 7/9button until “ ” disappears.• If the 8/6 button is kept on pressing and the beginning ofthe current track is reached during random play or programmedplay, the manual search in reverse is canceled and playback starts.(2) Manual Search in Reverse!0 To Cue and Stop Play ………………………………………………12• Cuing by direct selection, then entering the Pause state, isconvenient for practicing vocals with background music.Pause(Remote control only)(1) Cuing by Direct Selection1. Press the number buttons to set the number of the desired track.2. Press the 3 PAUSE button.• To start play, press the 1 PLAY button or 3 PAUSE button.• After setting the desired track selections in a program, press the 3PAUSE button. The player will advance to the beginning of the 1sttrack in program memory and wait in the pause state.(2) Cuing by Program Selection!1 Synchronized RecordingFunction ………………………………………………………………Connecting the SYNCHRO jack with a DENON cassette deck which isequipped with a SYNCHRO jack will allow synchronized recordings tobe made.• To use this function, be sure to connect the SYNCHRO jacks as wellas the LINE OUT terminal. (Refer to page 11 for connections.) Then,load a disc.• With the CD player in the stop or pause condition, starting asynchronized recording at the cassette deck side will automaticallycause the CD player to start playing. (This is synchronized play.)• The remote control indicator of the display will blink duringsynchronized play.Synchronized Recording FunctionNOTES:• Synchronized play is also possible in the program mode.• The repeat mode are cancelled when synchronized play is started.• Except for the 2 STOP, 1 PLAY and TIME buttons, the buttons willnot operate during synchronized play.• In the play condition, even if you start a synchronized recording atthe cassette deck side, CD player will not synchronize with thecassette deck and the cassette deck becomes synchronized pausecondition. In this case push the 2 STOP button of the cassettedeck, set the CD player in the stop or pause condition and start asynchronized recording at the cassette deck side again.• For further details, see the owner’s manual for the cassette deckthat has been connected.(8/6)(1 ~ 10)(3 PAUSE)