Getting Started Setup Playback Remote Control Information TroubleshootingENGLISHSpecificationsSelect the terminal to use and connect the device.47*%&0*/7*%&0$0.10/&/57*%&0: 1# 137*%&0*/)%.**/ */Monitor NOTE• The AVR-589 supports four video input formats:HDMI, component video, S-video and video.Because video signals are output from the AVR-589’s monitor output terminal in the same formatas the video input signals, the monitor outputterminal should be of the same type as theterminal used for input.• The component video connectors may beindicated differently on your monitor. For details,see the monitor’s operating instructions.• To play the sound by AVR-589, make analog ordigital audio output connections to AVR-589’saudio input connectors.Connecting the MonitorGFlow of video signals inside the AVR-589HCarefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnectcorrectly.DVD PlayerSelect the terminal to use and connect the device.Connecting the Playback Components47*%&0065"6%*0 7*%&0$0.10/&/57*%&0: 1 # 137*%&0065065"6%*03-065 065)%.*065$0"9*"-RLRLDVD player NOTEThe audio signal input tothe HDMI input connectorcannot be played on theAVR-589. Input the audiosignal to the digital audioinput connector or analogaudio input connector.• The same method can be used to connect an HDP (High-Definition Player) such as a Blu-ray Discplayer.• When using an optical cable for the digital audio connection, make the settings at “System Setup”– “Input Setup” – “Digital In Assign” (vpage 24).NOTEBecause video signals are output from the AVR-589’s monitor output terminal in the same format as thevideo input signals, the monitor output terminal should be of the same type as the terminal used forinput.High picturequality playback HDMI connectorComponent videoconnectorsS-Video connectorVideo connectorMonitorHDMI connectorComponent videoconnectorsS-Video connectorVideo connectorVideo input terminals Monitor outputterminalsConnections