Denon DHT-589BA Owner's Manual

Also see for DHT-589BA: Specifications Specification Comparison chart Getting started Specifications

Contents

Denon DHT-589BA Owner's Manual Manual pdf 15 page image

Getting Started Connections Setup Playback Remote Control Information TroubleshootingENGLISH SpecificationsConnections"6%*0"6%*03-065065$0"9*"-RLRLCD PlayerSelect the terminal to use and connect the device.CD playerWhen using an optical cable for the digital audio connection, makethe settings at “System Setup” – “Input Setup” – “Digital InAssign” (vpage 24).iPod®"4%/8R LR LiPod• With the default settings, the iPod can be used connected to theVCR (iPod) connector.• To assign the iPod to a connector other than VCR (iPod), makethe settings at “System Setup” – “Input Setup” – “iPod Assign”(vpage 24).Use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3Nor ASD-3W, sold separately) to connect the iPod to the AVR-589.For instructions on the control dock for iPod settings, refer to thecontrol dock for iPod’s operating instructions.47*%&0065"6%*0 7*%&0$0.10/&/57*%&0: 1# 137*%&0065065"6%*03-065 065)%.*015*$"-065RLRLTV/CABLE TunerSelect the terminal to use and connect the device.TV tunerWhen using a coaxial cable for the digital audio connection, make the settingsat “System Setup” – “Input Setup” – “Digital In Assign” (vpage 24).NOTEThe audio signal input to the HDMI input connector cannot beplayed on the AVR-589. Input the audio signal to the digital audio inputconnector or analog audio input connector.NOTEBecause video signals are output from the AVR-589’s monitor output terminalin the same format as the video input signals, the monitor output terminalshould be of the same type as the terminal used for input.NOTETo playback iPod Video or Photos on a TV monitor, connectthe TV to the S-Video Out terminal of AVR-589.