Denon DN-501C Owner's Manual

Also see for DN-501C: Owner's manual Quick start guide Owner's manual Instructions Quick start guide

Denon DN-501C Owner's Manual Manual pdf 19 page image

13Getting started Part namesand functions Connections Control functionSetting Defaults File and foldersettings Playback Information13ConnectionsInserting and ejecting discsThis operation is done when the power is switched on.1 Press ON/STANDBY to turn the power on.2 Hold the edges of the disc, and insert the disc intothe disc slot.• Do not touch the recorded surface (shiny surface) with yourhands.3 Press EJECT and remove the disc.n MessagesThe DN-501C displays various messages during use. The messagecontents are explained below.Message ContentNo Disc The disc slot is empty.Eject LockedEjection of the disc that is currently beingplayed is locked. Playback needs to bestopped for the disc to be ejected."NOTEDo not attempt to push a disc in by hand when the power is off. Doingso may damage the CD player or cause a malfunction.Connecting a USB device or iPodDN-501C supports external USB devices (mass storage class).• A USB hub is not supported.• FAT16/FAT32/HFS+ (read only) file systems are supported.USB device iPodNOTE• Do not remove the USB device during USB playback. Forciblyremoving the USB device during USB playback may damage thedata on the USB memory or hard disk.• Do not use an extension cable to connect the USB device.Cautions when using media• Do not use a cracked or warped CD or USB drive, or one that hasbeen repaired with adhesive.• “Loading...” appears on the display when media is used or loaded.Do not remove the media while this message is displayed.Connecting mediaDownloaded From Disc-Player.com Denon Manuals