Denon DN-700C Owner's Manual

Also see for DN-700C: MIDI Command Guide

Denon DN-700C Owner's Manual Manual pdf 37 page image

30Getting started Part namesand functions Connections Control functionSetting Defaults File and foldersettings Playback InformationRequired systemn Ethernet cable (CAT-5 or greater recommended)• Use only a shielded STP or ScTP LAN cable which is available at retailer.• The normal shielded-type Ethernet cable is recommended. If a flat-type cable or unshielded-type cableis used, other devices could be affected by noise.• When using this unit connected to a network with no DHCP function, make the settings for the IPaddress, etc., at “System Setting” (vpage 18).• When setting manually, check the setting contents with the network administrator.NOTEDENON assumes no responsibility whatsoever for any communication errors or troubles resulting fromcustomer’s network environment or connected devices.You can connect this unit to your network (LAN) to perform various types of playbacks and operations asfollows. Make network connections for this unit by carefully reading information on this page.• Streaming playback of tracks from a media server on the network• Control of the DN-700C via the networkNetwork settings need to be configured after the network (LAN) is connected. For details, see “NetworkSettings” (vpage 31).InternetTo WANRouterTo LAN side portTo LAN side port LAN port/EthernetterminalLAN port/EthernetterminalComputerMedia server, NAS(Network Attached Storage)ModemConnecting to a network (LAN)