Denon DN-700C Owner's Manual

Also see for DN-700C: MIDI Command Guide

Denon DN-700C Owner's Manual Manual pdf 63 page image

56Getting started Part namesand functions Connections Control functionSetting Defaults File and foldersettings Playback InformationInformationError messagesDetails on procedure for handling error messagesError message Cause/Solution RelatedPageNo Media • Cannot detect media. 14Unformat • The media is formatted in an unsupported format. Format themedia on DN-700C or set the format to FAT16 or FAT32. Fordetails, see the operation instructions of the recording media.–Media Full • The remaining space on a media is running low. Replace the mediawith a new one or delete files that are no longer required.–File Not Found • Target file does not exist. Check the file. 21VBR • This error message appears when a VBR file search is performed.Search cannot be performed on VBR files. The remaining time of afile is not displayed either.25Already Exists • A file with the same file name already exists. Change the file nameand then press the jog dial to enter the data.21• Key Restricted• All key Locked• Key lock is activated. To operate DN-700C, cancel the lock. 47IR Locked • Remote control operations are locked. To operate the remotecontrol, cancel the lock.18Not allowed • This appears when an invalid operation is performed. Check thedetails of the operation because the operation may be invalid dueto other setting items such as the preset menu etc.15Err Format • Format the media on DN-700C or set the format to FAT16 orFAT32. For details, see the operation instructions of the media.–Err Media X • The media is not compatible with the DN-700C. Replace withcompatible media.–ErrUpdateFile • Error in upgrading a file or file system.Contact your local Denon repair service center listed on our website(URL: http://www.d-mpro.com).–Err FlashROM • Error in flash ROM.Contact your local Denon repair service center listed on our website(URL: http://www.d-mpro.com).–Err Network • An error has occurred in the network connection. Check thenetwork connection.30, 31Track Not Found • The target track does not exist. Check the media. –Some files areskipped• Some file operations were skipped because files with the samename exist. Check the file name.–Password Error • Password authentication failed. Check the password. –RC-F400S error messagesError message Cause/Solution RelatedPageNot Connected • Check if it is properly connected to DN-700C. If this messagepersists, replace the cable.–Not Supported • A device that is not supported by RC-F400S is connected. Checkthe connected device.–No Media • The media inserted in DN-700C has not been detected. Eject andinsert the media again.14Error xxxxx • Contact your nearby service center listed on our web site(URL: http://www.d-mpro.com)–