8ENGLISHi Play/Pause button (13)• This button will start or pause playback.• Push once to start playback, once again topause playback, and once more to resumeplayback.o DISC EJECT button• Eject disc with this button while buttonillumination light. Note that if illumination is off,you cannot eject disc.(Eject lock function)!0 CUE button• Pushing this button in play mode will force thetrack back to the position which playbackstarted. While in search mode, it makes newCue point. (Cue)• In Cue mode, by pushing the CUE buttonmakes a Stutter sound from the Cue point. Thisis called Stutter play. (Stutter)!1 Platter/Scratch DiscUse this vinyl scratch disc for manual search,Pitch Bend and Scratch operations.• Platter:The Platter turns when playback of the sourceselect Scratch mode button is in the Main orSampler position and in play mode.• Scratch Disc:When the Scratch Disc is turning, Scratchplayback of the source selected (Main orSampler) starts.NOTE: The Platter does not turn when theScratch mode is set to the SEARCHmode. If “PLATTER TURN STOP” isselected within the presets, the Platternever turns, regardless of the Scratchmode.However, you still may be able toscratch normally without the platterspinning.When using the player in this mode,there will a small delay upon release ofthe scratch disc. (This is normal)To avoid this delay, press the PLAYbutton simultaneously upon release ofthe scratch disc with your thumb.(3) Top panelCAUTION:• Note that there are many buttons working twodifferent function selected by short timepushing or long pushing (1second or more). Themark indicates short time push function andmark indicates long time push function.CAUTIONS:• Do not forcibly try to stop the Platter whenit is turning. Otherwise Platter movingmechanism may be damaged.• If a problem with Platter rotation ariseswhen the Platter is turning, the Platterstops turning and the pause mode is set.!2 FLIP/CLR button• FLIP:Use this to select operating mode of A button,from Hot Start mode and Stutter mode. FLIPLED lights up in Hot Start mode.• A CLR:If the A button is pushed while pushing theFLIP button, you can clear the A point.Or, by holding down just the FLIP button formore than 1 sec.!3 (SAMP) RVS/CLR button• (SAMP)RVS:Use this to select the sample play directionforward and reverse. When select reverseRVS LED lights up.• (SAMP) CLR:If the SAMP button is pushed while pushingthe FLIP button, you can clear the SAMP data.Or, by holding down just the FLIP button formore than 1 sec.!4 A button• Using this button you can create starting pointfor Hot Start, Seamless Loop and Stutter.!5 SAMP button• Push this button to record or play sound ofSampler.!6 B button• Use this to set the B point for A point ofSeamless Loop.!7 (SAMP) B button• Use this to set the Sampler loop B point.!8 EXIT/RELOOP button• Use this to exit or return back again toSeamless loop playback. You can add varietyto looping with this function.• The LED indicates what’s going on aboutlooping.EXIT/RELOOP LED lit:Seamless Loop on or playing.EXIT/RELOOP LED flashing:Playback after exit loop.3 PART NAMES AND FUNCTIONS(1) Front panelq Disc loading slot• Load the disc slowly, and release it once theDN-S3000 starts grabbing the disc in.w CD drive• This Drive is field replaceable by you.• Optional spare drive is sold separately.CAUTIONS:• Do not load discs when the power is turnedoff.• Do not try to forcibly remove a disc oncethe DN-S3000 has started to grab the disc.• Do not load more than once disc at a timeor insert anything other than discs.Otherwise loading mechanism may bedamaged.e POWER button (¢ON £OFF)• Push this button to turn power on and off.r X-EFFECT jacks(X-EFFECT IN/OUT)• Connect this jack to the DENON mixer DN-X800 and DN-S3000 with 3.5 mm stereo minicord.t Analog output jacks(LINE OUT)• This is unbalanced RCA output jacks.• Audio signals outputs.y Fader start jack• Use this when your mixer has Fader Startfunction with 3.5 mm stereo mini cord.u Digital output jack• Digital data is available from this jack.• Use 75 Ω/ohms pin cord for connection.• We recommend you use braided wire typeshielded cable.NOTE: The playback level after analogconversion is set to -6dB of the usuallevel.(2) Rear panelCAUTION:• Do not turn off the power while a disc isloading or being ejected. Otherwise loadingmechanism may be damaged.