Denon DN-S3000 Operating Instructions Manual

Also see for DN-S3000: Operating instructions Service manual Manual

Contents

12ENGLISH7 SCRATCHqw1Select Scratch sourceq Select the source to bescratched using theSCRATCH MODE button.Each short push of theSCRATCH MODE button switchesbetween MAIN and SAMPLER.MAIN: The SCRATCH MODE buttonlight up in orange.SAMPLER: The SCRATCH MODE buttonlight up in green.• If scratching is possible, the LED for theselected source flashes.• If scratching is not possible immediately,because for example the Samplersetting has not been made, the LED forthe selected source lights withoutflashing.You can Scratch in CD or Sampler mode.2[Scratch Disc]w When MAIN is selected asthe Scratch mode andScratch Disc is turned byhand, the Main Track (CD)isscratched.When SAMPLER is selected as the Scratchmode and Scratch Disc is turned by hand,the sample is scratched.6 NEXT TRACK RESERVE• It is possible to standby at the beginning of the nexttrack to be played while continuing to play thecurrent track and to start playback of the next trackwithout interrupting playback.12 -1Enter Next Track modeq When the NEXT TRACKbutton is pushed, the NEXTTRACK RESERVE function isturned on.• When this mode is set, this button andCUE button blink.• When the button is pushed again, theNEXT TRACK RESERVE mode is turnedoff.Select the trackw Turn thePARAMETERS knob andselect for the next track tobe played.2 -2Select the MEMOe The CUE point of MEMO canbe selected as NEXT TRACK.• When the NEXT TRACK with whichMEMO is memorized is selected,“MEMO“ is displayed on a characterdisplay.• If the MEMO button is pushed at this time,the CUE point memorized as NEXT TRACKcan be selected.• It will be canceled the next track isselected by PARAMETERS knob.3Track search startr When the CUE button ispushed after selecting thetrack, current playbackcontinues, but the next track issearched for and the standbymode is set. When thestandby mode is set, the CUEbutton lights up and thePLAY/PAUSE button flashes.• At this time , loop playback is continuedduring the loop play for less than 8 seconds.In the case of beyond it, loop play is turnedoff, and it returns to normal playback.• The time display indicates the remainingplayback time for data in the memory.NOTE:The amount of time for whichplayback of the currently continuingtrack can be continued is a maximumof 15 seconds from the timesearching for the next track starts.PARAMETERSON / OFFPUSHqwert4Next Track playback startt When the PLAY/PAUSEbutton is pushed, the currentplayback is stopped andplayback of the next trackstarts.• If the PLAY/PAUSE button is not pushedafter standing by at the next track, whenin the CONT. playback mode, playback ofthe next track starts once all of thecurrently playing playback data has beenplayed.When in the SINGLE playback mode,playback stops once all of the currentlyplaying playback data has been played.