Denon DN-SC3900 Owner's Manual

Denon DN-SC3900 Owner's Manual Manual pdf 34 page image

28Getting started Preparations Connection MIDI Control Troubleshooting Specifications IndexOthers SettingsPlaybackHot listWhen the track list (search screen) is being displayed, a selected trackcan be temporarily registered to the music file list (hot list).NOTEWhen the unit power is switched off, all of the contents registered tothe created hot list are cleared.n Registering to the hot list1 Turn SEL. to display the track you want to register.2 Press HOT LIST ADD/REMOVE.“Add” is displayed, and the selected track is registered to thehot list.n Playing tracks registered to the hot list1 Hold down SHIFT, and press TIME.The hot list is shown in the display.2 Turn SEL. to select the track you want to play.3 Press SEL.The cue standby mode is set at the start of the selected tracks.n Clearing tracks from the hot list1 Hold down SHIFT, and press TIME.The hot list is shown in the display.2 Turn SEL. to select the track you want to clear.3 Press and hold HOT LIST ADD/REMOVE.The selected track is cleared.n Sharing hot listsWhen multiple DN-SC3900 units, are connected via a network, hotlists can be shared between units.For details, “Sharing hot list information” (vpage 32).Auto BPM counterDuring playback or cue standby, the tempo (BPM) of the track isautomatically measured and displayed.n Auto BPM counterPress and hold TAP.• The auto BPM counter switches on, and the tempo (BPM) isshown in the display.• If the track changes when the BPM is locked, the lock is removed,and the auto BPM counter switches on.NOTEDepending on the track, the automatic BPM measurement may notbe performed correctly. In this case, perform “TAP Input” or “ManualBPM input”, and measure manually.Operations during playbackn BPM lockThis function locks data measured by the auto BPM counter.When the auto BPM counter is on, press TAP.“BPM LOCK” is shown in the display, and the data measured by theauto BPM counter is locked.n Measuring BPM manuallyTAP InputThe tempo (BPM) is measured according to the interval betweenrepeated pressings of the TAP.When BPM is locked, repeatedly press TAP in time withthe beat.The measured tempo (BPM) is shown in the display.Manual BPM InputEnter the tempo (BPM) as a number.1 Hold down TAP, and turn SEL.BPM value appears on the display.2 Turn SEL. to the tempo (BPM) you want to set, andrelease TAP.The set value is entered, and data is locked.• Press and turn SEL. to enter numbers below the decimal point.See the illustration on the previous page for details of the buttons used for theoperations on this page.