Denon DN-SC3900 Owner's Manual

Denon DN-SC3900 Owner's Manual Manual pdf 36 page image

30Getting started Preparations Connection MIDI Control Troubleshooting Specifications IndexOthers SettingsPlaybackNetwork playback operationsThis section explains the operations used when the unit isconnected to the network.Sharing tracks on the networkTracks on the USB memory device or computer are shared.n Sharing between DN-SC3900 units(Players Link)• When more than one DN-SC3900 units are connected, tracks canbe shared between units.• In this example, a USB memory device connected to aDN-SC3900 unit set with “Network ID” “1” is searched byanother DN-SC3900 unit with the “Network ID” “2”, and tracksare played back from the USB memory device.• In “Utility” – “Preset Setting” – “Network ID” (vpage 41),set the Network IDs for the DN-SC3900 units in advance.1 Press LINK on the unit set as “Network ID” “2”, andselect the unit whose “Network ID” is “1”.• The search status of the unit set as “Network ID” “2”becomes the same as the unit set as “Network ID” “1”.• When the unit set as “Network ID” “2” is operated, the unitset as “Network ID” “1” performs the same operations insync.2 Search and enter the track on the unit set as“Network ID” “2”.The unit set as “Network ID” “2” switches to cue standby.n Sharing between this unit and a computer(PC Link)• Tracks can be shared between this unit and a computer• In this example, tracks on the computer are searched and playedusing the unit set as “Network ID” “1”.1 Press LINK on the unit set as “Network ID” “1”, andselect “engine”.• The unit set as “Network ID” “1” is displayed on the“engine” control panel.• The unit set as “Network ID” “1” can be used as the“engine” controller.2 Turn SEL. to search for a track, and press SEL. onthe unit set as “Network ID” “1”.The track is loaded, and the unit set as “Network ID” “1”switches to cue standby.• For details of how to operate “engine”, see mengine Instructionmanual.NOTE• If the same “Network ID” is used between different units, theycannot be connected on the network. If the same network IDs areduplicated, “SET ID >>>1 (duplicated “Network ID” number)” isdisplayed. Use SEL. to set another “Network ID”.• When sharing tracks between this unit and the computer, firewallsettings on the computer need to be cancelled for “engine”. Fordetails on the setting method, see mengine Instruction manual.Adjusting the track startup/end timeThis function adjusts the track startup and end times. By using thisfunction, tracks can be started and stopped with similar characteristicsto an analog player.z1 z2n Adjusting the track startup timeTurn START TIME.• Turn to the left to make the track startup time faster.• Turn to the right to make the track startup time slower, and closerto the characteristics of an analog player.z1 When adjusted within this range, the track startup speed is 0seconds, irrespective of the platter rotating speed.n Adjusting the track end timeTurn STOP TIME.• Turn to the left to make the track end time faster.• Turn to the right to make the track end time slower, and closer tothe characteristics of an analog player.z2 When adjusted within this range, the track end speed is 0seconds, irrespective of the platter rotating speed.n About REAL VINYL functionWhen VINYL mode is on (when VINYL is lit orange), the rotatingspeed of the platter also changes.The CD is played with similar characteristics to an analog playeraccording to the rotating speed of the platter.Operations during playbackSee the illustration on the previous page for details of the buttons used for theoperations on this page.