Denon DN-X100 Operating Instructions Manual

Also see for DN-X100: Operating instructions Service manual

Contents

10ENGLISH6 ROTATING INPUT SELECT SWITCHES1. Disconnect the power.2. Remove knobs from the Top Panel.3. Remove the 6 screws attaching the Top Panel.4. Remove the 2 screws attaching the Switch unit.5. Rotate the Switch unit to the desired location.6. Reinstall the 2 screws holding the Switch unit.7. Reinstall the Top Panel and reattach knobs.Cable 1 RCA pin plugSleeve=GNDRing=ColdTip=HotBalanced Cable 2Sleeve=GNDRing=ColdTip=HotBalanced (1/4” TS)Cable 3Sleeve=GNDRing=ColdTip=HotBalanced (1/4” TRS) BalancedCable 41=GND2=Hot3=Cold1=GND2=Hot3=Cold Sleeve=GNDRing=ColdTip=HotAbout the CablesUnbalanced(For BALANCED MASTER OUT)(For MIC)(For BALANCED MASTER OUT)Balanced (1/4” TRS)XLR3-12CBalancedXLR3-11C(For RCA PINJACK)Switch unit