Denon DN-X100 Operating Instructions Manual

Also see for DN-X100: Operating instructions Service manual

Contents

8ENGLISH4 SPECIFICATIONS• Phono Inputs: 2 Stereo Unbalanced RCA jacksInput Impedance 50 kΩ/kohmsLevel –50 dBV (3 mV)• Line Inputs: 2 Stereo Unbalanced RCA jacksInput Impedance 20 kΩ/kohmsLevel –14 dBV (200 mV)• EQ Control (Line): 3 BandsControl Range HI: –30 dB to +10 dB (at 16 kHz), –38 dB to +10 dB (at 20 kHz)MID: –38 dB to +10 dB (at 01 kHz)LOW: –38 dB to +06 dB (at 060 Hz)• Mic Inputs: 1 Mono Active Balanced 1/4” TRS jackInput Impedance 2 kΩ/kohmsLevel –54 dBV (2 mV)Frequency Response 20 Hz to 20 kHz (±3 dB)S/N 66dB• EQ Control (Mic): 2 BandsControl Range HI: –12 to +12 dB (at 10 kHz)LOW: –12 to +12 dB (at 100 Hz)• Master Output:Balanced Stereo Active Balanced 1/4” TRS jackOutput Impedance 150 Ω/ohmsLevel +4 dBm (1.23 Vrms) (600 Ω/ohms load)Frequency Response 20 Hz to 20 kHz (±2 dB)THD+N LINE : Below 0.05 % PHONO : Below 0.07 %S/N LINE : 85 dB PHONO : 76 dBCross Talk Over 75 dBUnbalanced Stereo Unbalanced RCA jacksOutput Impedance 1 kΩ/kohmsLevel 0 dBV (1 Vrms)V (10 kΩ/ohms load)Frequency Response 20 Hz to 20 kHz (±2 dB)THD+N LINE : Below 0.05 % PHONO : Below 0.07 %S/N LINE : 85 dB PHONO : 76 dBCross Talk Over 75 dB• Headphone Output: StereoOutput Impedance 33 Ω/ohmsLevel 0 dBV (1 Vrms) (32 Ω/ohms load)• Power Source: AC 10 V 750 mA x 2• Power Supply, Consumptions:USA, Canada AC 120 V ± 10 %, 60 Hz (AC adaptor : AA-26)Europe, Asia, Oceania AC 230 V ± 10 %, 50 Hz (AC adaptor : AA-27)• Unit Size 220 (W) x 226 (D) x 85.4 (H) mm• Mass 2.8 kg AC adaptor : 0.5 kg✽ Specifications and design are subject to change without notice for purpose of improvement.