Denon DNP-720AE Owner's Manual

Also see for DNP-720AE: Specification Owner's manual Owner's manual Service manual Network Setup Guide

27Getting started Connections Basic operations Advanced OperationsAdvanced operations TroubleshootingExplanation termsInformation Specifications IndexENGliShUpdate NotificationDisplays a notification message on this unit’s menu screen when thelatest firmware is released with “Firmware Update”.Connect to broadband Internet (vpage 6) when using thisfunction.1 Press [MENU].Turns on the Menu settings mode and the Menu appears onthe display (vpage 20 “Menu map”).2 Use ui to select “Network” – “Other Network” –“Update Notification”, then press [ENTER],<1/3 ENTER> or p.“Update Notification” menu appears.3 Use ui to “On”, then press [ENTER],<1/3 ENTER> or p.On Display update message.Off Do not display update message.• When you press [ENTER] or <1/3 ENTER> during display of thenotification message, the “Check for Update” is displayed. (Refer topage 28 for more information on “Firmware Update”.)• Press o to erase the notification message.Setting the network [Network]Upgrade NotificationDisplay a notification message on this unit’s menu screen whendownloadable firmware is released with “Add New Feature”.Connect to broadband Internet (vpage 6) when using thisfunction.1 Press [MENU].Turns on the Menu settings mode and the Menu appears onthe display (vpage 20 “Menu map”).2 Use ui to select “Network” – “Other Network” –“Upgrade Notification”, then press [ENTER],<1/3 ENTER> or p.“Upgrade Notification” menu appears.3 Use ui to “On”, then press [ENTER],<1/3 ENTER> or p.On Display upgrade message.Off Do not display upgrade message.• When you press [ENTER] or <1/3 ENTER> during display of thenotification message, the “Add New Feature” is displayed. (Refer topage 28 for more information on “Add New Feature”.)• Press o to erase the notification message.Setting the others [Other]Auto StandbyWith the Auto Standby ON, this unit will automatically enter thestandby mode after about 30 continuous minutes of stop mode withno operation.• The default setting is “Off”.1 Press [MENU].Turns on the Menu settings mode and the Menu appears onthe display (vpage 20 “Menu map”).2 Use ui to select “Other” – “Auto Standby”, thenpress [ENTER], <1/3 ENTER> or p.“Select Auto Standby” menu appears.3 Use ui to select “On”, then press [ENTER],<1/3 ENTER> or p.The setting is entered.NOTEIn the following situations, the Auto standby function does not operate.• When an iPod or USB memory device is connected to the USB/iPodport on the unit.• When the input source is “TUNER”.• When the input source being played is “Internet Radio”, “MusicServer”, “Last.fm” or “Napster”.1.DNP720AEE2_ENG_Final_0727.indd 27 2011/07/30 8:39:20