Web control functionYou can control this unit from a web control screen on a web browser. .PCThis unitRouter0 This unit and the PC need to be connected to the network properly in order to usethe web control function. “Connecting to a home network (LAN)” (v p. 21)0 Depending on the settings of your security-related software, you may not be ableto access this unit from your PC. If this is the case, then change the settings of thesecurity-related software.Controlling the unit from a web control1 Switch the “Network Control” setting to “On”.(v p. 66)2 Check the IP address of this unit with “NetworkInformation”. (v p. 66) .IP Address[Network Information ]192.168.0.2Checking the IP address.3 Start up the web browser.Contents Connections Playback Settings Tips Appendix51Front panel Rear panel Remote controlunit Index