Denon DNP-730AE Owner's Manual

Also see for DNP-730AE: Quick start guide Owner's manual Service manual

Contents

o Cannot connect by Wi-FiSymptom Cause / Solution PageCannot connect to thenetwork.0 The network name and password (WEP, etc.) settings are wrong. Configure the network settingsaccording to the setting details of this unit.720 Reduce the distance between the wireless LAN access point and this unit, remove any obstructions andmake sure the view to the access point is unobstructed before trying to connect again. Also, installmicrowave ovens and other network access points as far away as possible.－0 Check the router power supply. －0 This unit supports IEEE802.11.b/g/n. －0 Configure the access point channel settings away from channels that are being used by other networks. －0 This unit is not compatible with WEP (TSN). －Cannot connect to WPS. 0 Check that the WPS mode of the router is operating. －0 Press and hold the Wi-Fi CONNECT button on this unit for approximately 3 seconds within 2 minutes ofoperating the router.－0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to“None”, “WPA-PSK (AES)” or “WPA2-PSK (AES)”.670 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the Wi-FiCONNECT/WPS button. In this case, use the “Auto-Scan” or “Manual” method to connect.58Cannot connect to thenetwork using iPhone/iPodtouch/iPad.0 Update the iPhone/iPod touch/iPad firmware to the latest version. －Contents Connections Playback Settings Tips Appendix83Front panel Rear panel Remote controlunit Index