Denon DNS1200 - USB DJ CD Player Owner's Manual

Also see for DNS1200 - USB DJ CD Player: Addendum to owner's manual Quick start guide Midi specifications Service manual

Contents

Getting Started Playback SpecificationsBasic Operations Memo Function UtilityAbout Connected Devices1. PS/2Keyboardq Qwerty, Qwertz, Azerty type keyboard layouts are supported.w The DN-S1200 can be operated from the keyboard.For the usable keys and their functions, refer to the table below.Keyboard DN-S1200 Front Panel Button1 PARAMETERS knob (Scroll Up)2 PARAMETERS knob (Scroll Down)3 ENTER Pushing PARAMETERS knob4 ESC BACK button5 Shift+TAB Connects by D-Link and switches tofunctions operable from the keyboard.6 INSERT SOURCE button7 Windows PLAYLIST button8 ALT NEXT TRACK button9 F1 TIME button10 F2 TITLE button11 F3 TIME button (Press and hold in)12 F12 Switches the number of steps forfile searching.NOTEKeys (characters) other than the ones on the above table are usedwhen inputting characters. For a list of the characters that can beused, see the section called “About Character Input” (vpage 23).2. USB mass storage deviceq Operation of the USB device may be unstable when using the buspower only.w If the USB device is not recognized, it might be recognized if it isdisconnected then reconnected.e Devices on which power is supplied from the device to the hostequipment side in a way not conforming to USB standards coulddamage the host equipment. Do not use such devices.r Do not disconnect a USB device when it is selected to beoperated by the DN-S1200 or when the database is being created.Disconnecting while the device is being accessed could damagefiles, etc.t For large capacity USB devices and USB devices that are notspecifically designed for data storage (MP3 players, etc.), it maytake some time for the device to be recognized after it is connectedto the DN-S1200.y Use a USB memory device meeting or in conformity with the USBCompliance Test.u The DN-S1200 is not compatible with USB hubs.i The DN-S1200 is compatible with FAT16 and FAT32.3. iPod®q Only Windows format iPods® can be used.Macintosh formatiPods® cannot be used.w MP3/WAV files transferred from iTunes® to an iPod® are read-onlyfiles, so the MEMO function cannot be used with them.e In iTunes®, place a check mark at “Manually manage music” in“Summary”–“Options”.r MP3/WAV files transferred from iTunes® to an iPod® are managedwith iPod’s® specific file names, so it is not possible to searchusing the original file names.We recommend searching using ID3 tags (artist,album, title, genre,year, BPM, etc.).b iPod® and iTunes® are trademarks or registered trademarks ofApple Computer, Inc.4. Othersq With the DN-S1200, the software can be updated using a USBdevice, but note that some time may be required for the device tobe recognized.w Do not use cables other than those conforming to USB standards.Using modified USB cables could damage the DN-S1200.e If there is a large number of files stored in folders on the device,searching may take some time and operation may be unstable.Keep the number of files per folder to under 1000.Switching the DeviceThe device being played can be switched.CD is first selected when the power is turned on.The operation procedure is described below.1 Press the SOURCE button.The “SOURCE” selection screen is displayed.2 Turn the PARAMETERS knobor Scratch disc to select thedevice.3 Press the PARAMETERS knob to set.b Operation is possible once the device is prepared.When “CD” is selected:The CD can be played.When “USB” is selected:The USB can be played.When “PC” is selected:The USB MIDI control mode is set.About the USB MIDI control modeWhen multiple DN-S1200s are connected to this set, change the“PRESET” – “(24) MIDI CH Set” setting to a different number(vpage 27).USB AudioThe USB Audio interface is compatible with one set of stereo outputsand a sampling frequency of 44.1 kHz.The DN-S1200 supports low latency ASIO/OSX Core Audio.Connections