Denon DNS1200 - USB DJ CD Player Owner's Manual
Also see for DNS1200 - USB DJ CD Player: Addendum to owner's manualQuick start guideMidi specificationsService manual
                                   | |
Getting Started Connections Playback SpecificationsBasic Operations Memo Function(27) Version No:The DN-S1200’s software version is displayed. (SYSTEM / DSP)(28) Touch Int.:The Adjust the Scratch disc.1) Press the PARAMETERS knob and select “Touch Int”.“Cancel” flashes on the character display.2) Turn the PARAMETERS knob to display “OK”.3) Press the PARAMETERS button.“Touch Initial!” is displayed once initialization is completed.4) Once clearing is completed, “Completed!” is displayed.(29) Preset Int:Set all the preset data back to the factory defaults.1) To clear the PRESET data, push the PARAMETERS button. “Preset Int?” flashes on the characterdisplay.2) Push the PARAMETERS button again. “Preset Initial!” is displayed on the character display whiledata clearing.3) Once clearing is completed, “Complete!” is displayed.Compatible FilesThe files that can be played using an external USB memory device are as shown below.NOTE• Depending on the type of MP3 encoding software, with some files noise may be generated or it may notbe possible to play the file.• Recordings you make are for your personal use and should not be used in ways infringing upon thecopyright holder as per copyright laws.• With MP3 files, the files cannot be played if the pitch is 24% or greater.MP3/WAV FORMATMP3 FormatMPEG-1 Audio Layer-3 40-320kbps f/s 44.1kHz, ,STEREOID-3 Tag V1.0, V1.1, V2.2, V2.3, V2.4(ASCII + ISO8859-1(West European))Encording C.B.R, V.B.R.WAV FormatPCM 16bit f/s 44.1kHzMetadata Tag Supported by Denon DJ Music Manager, Audio Grabber,Dragon Tagger.m3u and .xml playlists are supported only through DENON DJ Music Manager.Utility |
Related manuals for Denon DNS1200 - USB DJ CD Player
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine