Denon DP-300F Operating Instructions Manual

Also see for DP-300F: Operating instructions Product View Specifications Service manual Operating instructions

Contents

3Getting Started Getting StartedENGLISHAdjustmentsTurn the power off when making the adjustments.CounterweightLifter leverArmrestTone armCartridgeTurntableStylus pressureadjustment ringAnti-skating knobNOTE:• Be very careful not to damage the stylus tip on the turntablesheet, etc.Set the anti-skating knob to “0”.1 Lower the lifter lever and move the tone arm over theturntable.For cartridges with removable stylus covers, remove the styluscover.2Balance the tone arm.• Move the counterweight forward or backward so that the tonearm is parallel to the turntable surface when you are nottouching it.3Set the tone arm back on the armrest.4 Holding the counterweight with a finger so that itdoes not move, turn the stylus pressure adjustmentring so that it’s “0” mark is lined up with the centerline of the tone arm’s rear shaft.5Turntable surface Tone arm Counterweight(Weight too far to the back) (Weight too far to the front)CounterweightCenter lineStylus pressureadjustment ringATurn the counterweight in the direction of arrow “A”and set to the appropriate stylus pressure for thecartridge.The appropriate stylus pressure for the included cartridge is 2.0g (19.6 mN). Set to “2”.6Turn the anti-skating knob and set to the same valueas for the cartridge’s stylus pressure.• The proper anti-skating value can be achieved.7Stylus pressure and anti-skating adjustmentSetting reference pointENGLISH