5OperationENGLISHOperationLifter leverSPEEDSIZEArmrestTone armFinger catchSTOPSTARTTurntable¢ Opening the stylus coverRaise the stylus cover before starting playback.Place the record on the turntable.For EP (“doughnut”) records, use the 45 rpm adapter.1Set the record’s playing speed using SPEED.For 33 1/3 records ...........................Set to ¢ 33For 45 records .................................Set to £ 452Set the record size using SIZE.For 30 cm records ...........................Set to ¢ 30 cmFor 17 cm records ...........................Set to £ 17 cm3Press START and hold it in for about 1 second.• The turntable starts turning and playback starts automatically.• Once the record is played, the tone arm returns to its originalposition and the turntable automatically stops turning.4• Once you have finished playing records, lower the stylus cover toprotect the stylus tip.• This set has an “auto return” function by which the tone armautomatically returns to its original position once a specific point isreached after a record finishes playing. Though there is no problemwith records of normal size, with records including grooves up tothis point, the auto return function may be activated before playbackis finished.NOTE:• Do not touch the tone arm or turntable or turn off the powerwhile a record is playing.• The auto play system cannot be used for 9 ft/25 cm records.In this case operate manually. If the tone arm does not return toits original position after playback stops, press STOP.Place the record on the turntable.For EP (“doughnut”) records, use the 45 rpm adapter.1Set the record’s playing speed using SPEED.For 33 1/3 records ...........................Set to ¢ 33For 45 records .................................Set to £ 452Raise the lifter lever and holding the head shell’sfinger catch move the tone arm to the beginning ofthe selection you want to play.3Lower the lifter lever.• The tone arm lowers the stylus tip slowly onto the record andplayback starts.4NOTE:• Be careful not to scratch the record.Press STOP.• Playback stops and the tone arm returns to its original position.It is also possible to stop playback by raising the lifter lever. Inthis case lift it using the head shell’s finger catch and move thetone arm back to the arm rest.ENGLISHStarting playback using the auto play function Starting playback manuallyStopping playback in the middle of a recordPlaybackpositionPosition when not in useStylus coverCartridge