7 Holding the counterweight with a finger so that it doesnot move, turn the stylus pressure adjustment ring sothat its “0” mark is lined up with the line on the tonearm. .Stylus pressureadjustment ring8 Turn the counterweight in the direction of the arrow sothat the “2” mark of the stylus pressure adjustmentring is lined up with the line on the tone arm. .0 The appropriate stylus pressure for the cartridge included with this unit is2.0 g (19.6 mN).Adjusting anti-skatingAnti-skating adjustment is performed to counter the force which pulls thestylus tip inside due to the record rotation.1 Turn the anti-skating dial so that it is lined up with “2”. .0 Make sure that the anti-skating value is the same as the stylus pressurevalue.Contents Preparations Connections Playback and recording Tips Appendix19Front panel Rear panel